Yamaha Portatone PSR-640 Owner's Manual page 69

3
Select the file type.
Use the data dial, the [+/YES] button or the [-/NO] button.
Refer to the file type list below:
All
Style + Reg.
Style
Multi Pad
Regist
4
Press the [NEXT] button to display the FILE selection screen.
5
Select the destination file.
Use the data dial, the [+/YES] button or the [-/NO] button.
Select NEW when creating a new file.
6
Press the [NEXT] button to display the NAME screen.
7
Enter the file name directly from the keyboard (page 21).
8
Press the [NEXT] button to display the Save operation
screen.
9
Execute the Save operation.
Press the [+/YES] button to execute
the SAVE operation.
Press the [-/NO] button to abort the
SAVE operation.
Save all User Style (161-163), User Pad (bank 37-40), and Registration
Memory (bank 01-32) and all setup data into one single file.
Save all User Style (161-163) and Registration Memory (bank 01-32)
data gathered together into one single file.
Save all User Style (161-163) data gathered together into one single file.
Save all User Pad (bank 37-40) data gathered together into one single
file.
Save all Registration Memory (bank 01-32) data gathered together into
one single file.
Disk Operations
• Although all User Style, User
Pad, and Registration
Memory data can be saved
gathered into one single file,
the data can be recalled indi-
vidually when loaded back
into the PSR-740/640.
• If you've selected a file that
already contains data and
you rename the file with the
intent of overwriting the data,
renaming the file will simply
copy that data to the new file
name, and leave the original
data and file name intact.
CAUTION
• While data is being saved,
never eject the floppy disk
or turn off power to the
PSR-740/640.
• If there isn't enough space
on the disk, an alert
message appears, and you
will not be able to save any
data. You can delete
unneeded files on the disk
(page 75), or replace the
disk with a new one and
repeat the Save operation.
• If a write error occurs during
The SAVE operation a save operation, an alert
message message appears.
is completed...
If the error reoccurs after
repeating the Save
operation, there could be
something wrong with the
disk. Insert a different disk in
the drive and repeat the
Save operation.
69