Panasonic AG-DV1000P Operating Instructions Manual page 13

Settings Using the On Screen Display
POWER SAVE Mode
1
Press
MENU
and select
OPTION SETUP1
using a or
v, and then press
SET.
On Screen Display
2 Select
POWER SAVE MODE
using
a
or
v,
and then
press
SET.
OPTION SET UP 1
3
Select
OFF, 2H
or
6H
using < or >, and then press
SET.
POWER SAVE MODE
OFF: This setting does not conserve power when the
VTR is oft.
2H: The VTR turns off automatically if no operation is
performed for approximately two hours.
6H: The VTR turns off automatically if no operation is
performed for approximately six hours.
4
Press
EXIT to
exit the On Screen Display.
WIDE Mode
1
Press
MENU
and select
OPTION SETUP1
using
a
or
v, and then press
SET.
2
Select
WIDE MODE
using
a
or
v,
and then press
SET.
OPTION SET UP 1
3 Select
OFF
or
SI
using < or >, and then press
SET.
OFF: Normal mode.
SI: When the S-Video input socket on the monitor
that is connected is an SI-Video socket.
(If a wide mode video signal is sent to the
monitor, the monitor screen size will
automatically switch to wide mode.)
4
Press
EXIT
to exit the On Screen Display.
INPUT TBC Mode
1
Press
MENU,
and select
OPTION SETUP1
using
a
or
v, and then press
SET.
2
Select
INPUT TBC
using
a
or
v,
and
then press
SET.
3 Select
ON
or
OFF
using < or >, and then press
SET.
OFF: Set to this position when the dubbed images were
disturbed at the ON position.
ON: At this position, the subtle shaking and distortion
of the pictures are suppressed when a cassette
tape which was recorded using another camera or
VTR is dubbed on this unit.
4 Press
EXIT
to exit the On Screen Display.
Note:
The INPUT TBC function does not work for signals from a
DV input.
13