Teletext Controis; Switching To Teletext 00.0; Picture & Sound In Teletext Mode - Sanyo 14MT2 Instruction Manual

Hide thumbs Also See for 14MT2:
Table of Contents

Advertisement

18
TEXT BRIGHT
oe
MINIMUM
@ Teletext Controls
@ Switching to the Teletext
@ Picture & Sound in Teletext mode
CENTRE @) MAXIMUM
>
F&F
"1 4.
Function
TEXT/MIX/TV switch
0-9 numeric buttons
Page up/down
Index page selection
Hold
Size
Cancel
Sub coded page selection
Reveal
Red
Green
Yellow
Blue
Press the EJS)
button, to select teletext.
Press again to select teletext and TV picture.
Press again to return to TV mode.
@ Picture and Text brightness controls in the teletext mode
You can not adjust the picture or teletext brightness in the
teletext mode. You must first switch back to the TV mode
and then adjust the picture control or set the teletext
brightness level.
@ How to set the teletext brightness level
7
2
3
Press the F(..) button repeatedly in the TV mode until the
word "TEXT BRIGHT" appears on the screen.
Press the —«l+
or «-
button to select one of the 3
teletext brightness levels either MAXIMUM,
CENTRE or
Confirm the selected teletext brightness level by switching
to the teletext mode by pressing the E=}4(_)
button.
@ Sound control in the teletext mode
Only sound volume and muting can be controlled in the
teletext mode but the on-screen display will not appear.

Advertisement

Table of Contents
loading

Table of Contents