Safety Instructions; Cleaningand Maintenance - Casselin JEDY CSMJ Manual

EN
fig.7
NOTICED
The device is equipped with a safety system in case of overheating. If triggered, unplug the device and
allow it to cool. If this protection system activates regularly, it is imperative to contact your dealer.
After the automatic switch-off, the device can only be put into operation by pressing the Reset button on the
back of the device. To do this, wait for the temperature to drop, press the Reset button.
6.CLEANING AND MAINTENANCE

6.1 Safety instructions

Any maintenance, cleaning or repair of the device must be carried out with the device unplugged (isolated
from all electrical sources).
The use of caustic detergents and baking soda for cleaning is prohibited. Water must not penetrate inside
the device.
Never immerse the device in water or other liquid.
WARNING
The device cannot be cleaned with a direct water jet (no pressurized water jet).
6.2 Daily maintenance
Unplug the device
Clean the device with warm water and a clean cloth after each use
After cleaning, use a soft, dry cloth to polish and dry the device. All parts must be dried.
Store the device in a dry place.
6.3 Safety instructions for maintaining the device
Daily check for damage to the power cord. Never use the appliance when the cord is damaged. If the cord
shows defects, it must be replaced by a qualified technician.
In the event of a breakdown, contact your dealer.
Any maintenance or repair work should only be carried out by a professional.