Inspection Following Transport; Packaging; Storage; Hardware Features - Casselin JEDY CSMJ Manual

3. TRANSPORT, PACKAGING AND STORAGE

3.1 Inspection following transport

Verification of the absence of damage and the completeness of the device must be carried out upon receipt
of the package. If transport damage is identified, refuse or accept the delivered product only with reservation
*. A complaint detailing the defects noted must subsequently be made. The collection of damages is only
possible in the event of a complaint made within the stipulated time limits, i.e. 24-48 hours maximum.
* written on the carrier's paper or digital delivery notes.

3.2 Packaging

The packaging of the device must be kept in the event of moving, or for return to after-sales service. The
interior and exterior packaging must be completely removed before using the device. The standards in force
in your country regarding environmental protection must be respected before destruction of the packaging.

3.3. Storage

ATTENTION
The device can be kept in stock but only in its original closed packaging.
Storage can be carried out in compliance with these conditions:
• Storage in a dry, non-humid room
• Sheltered from the sun
• Stock control for more than 2 months (general condition of the device and all the elements constituting it)
• No shaking of the material
• Storage in closed premises and not outside.

4. HARDWARE FEATURES

* Subject to change
Model
Sound level
Electrical data
Air speed
Drying time
Dimensions
Weight
5. INSTALLATION AND USE
CSMJ
78dB
1400 W / 230 V
110 m/s
5-10 seconds
L 300 x D 250 x H 680 mm
8.6 kg
CSMJB
78dB
1400 W / 230 V
110 m/s
5-10 seconds
L 300 x D 250 x H 680 mm
8.6 kg
EN