Yamaha PF-500 Installation Manual page 11

4 The "Install Location" box displays the destination of the installa-
tion. If you wish to change the destination disk or folder, use the
[Switch Disk] button and the pop-up menu to specify the desired
destination.
n This box usually displays the start-up disk as the destination.
5 Click the [Install] button. The system displays the following mes-
sage: "This installation requires your computer to restart after
installing this software. Click Continue to automatically quit all
other running applications." Click [Continue].
n To cancel the installation, click [Cancel].
6 The installation starts. If the driver has already been installed, you
will receive the following message. To return to step 3, press
[Continue]. To complete the installation, click [Quit].
7 When the installation is complete, the system displays the follow-
ing message: "Installation was successful. You have installed soft-
ware which requires you to restart your computer." Click
[Restart]. The computer automatically restarts. You can locate the
installed files in the following locations:
• System Folder | Control Panels | YAMAHA USB MIDI Patch
• System Folder | Extensions | USB YAMAHA MIDI Driver
• System Folder | OMS Folder | YAMAHA USB MIDI OMS
Driver
File Utility, MIDI Setup
Once you've installed these software programs, you can use your
computer to access and organize data stored to media connected to the
PF-500 (Storage memory).
1 Double-click on the "FileUtil_" folder in the CD-ROM.
"Install File Utility" file will be displayed.
2 Double-click on the "Install File Utility" file.
The File Utility installation dialog will be displayed. Execute the
installation by following the on-screen directions.
3 After installing, restart the computer.
For details, refer to the on-line Help or the PDF owner's manual.
Accessory CD-ROM Installation Guide (PF-500) 11