Advertisement
Description of Parts
1. Carrying handle
2. Indicator Light
3. Power/Heat switch
4. Thermostat Control
5. Timer
6. Cord Storage
7. Wheel Plates (x2)
8. Castors (x4)
9. Domed Nuts (x4)
10. Radiant Fins
11. U-Bolts (x2)
12. Wing Nuts (x4)
11
12
Before the first time you use your Oil Filled Radiator
Remove all packing materials and discard responsibly. Before assembling
your Oil Filled Radiator, ensure that all parts are present – see Description
of Parts above.
Assembling your Oil Filled Radiator
•
Place protective material (such as carpet or cardboard) on the floor to prevent
scratching or damage to the appliance.
•
Turn the radiator upside down ensuring that it is stable. The oil inside the
radiator will be heard to settle inside this is quite normal.
•
Attach the Castors (8) to the Wheel Plates (7) using the Domed Nuts (9)
supplied as per the image below, tighten with a suitable spanner (not
supplied):
•
Next remove the Wing Nuts (12) from one of the U-Bolts (11) and loop the U-
Bolt (11) between the first and second fins behind the Cord Storage (6), attach
the Wheel Plate (7 – above) securing in place using the Wing Nuts (12) as in
the image below, taking care not to overtighten:
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
1
2
3
4
5
6
2000W Oil Filled Radiator with Timer
Model No. HEA1782
7
Left: The Wheel Plates
(7) with the Castors (8)
fitted.
User Manual
10
8
9
8
7
Advertisement
