NLSet up and connect
Observe the maximum load capacity
of the programmes.
→ "Programs", page 26
aExceeding the maximum
male load quantity extends the
program duration and increases
energy consumption.
After drying, clean the fluff filter →
Page 31 .
aA dirty fluff filter
reduces the airflow in the
appliance, extends the program
duration and increases energy
consumption.
3.3 Energy Saving Mode
If you do not operate the device for a
longer period of time, the device
automatically switches to energy-
saving mode. All clues disappear and
pert.
The energy-saving mode is exited
when you operate the device again.
4 Set up and connect
4.1 Unpack the device
NB!
Objects left in the drum that are not
intended for the use of the appliance
can lead to material and appliance
damage.
Remove all these objects and the
▶
supplied accessories from the drum
before use.
Remove packaging material and
1.
protection
ng completely from the appliance
ready.
12
Start/Pausecut-
→ "Disposing of the packaging",
Page 11
Check the device for visible
2.
damage.
Open the door.
3.
Remove the accessories from the
4.
drum.
Close the door.
5.
4.2 Scope of Delivery
After unpacking, check all parts for
transport damage and the
completeness of the delivery.
NB!
Use with incomplete or defective
accessories may impair the operation
of the device or cause material
damage and damage to the device.
Do not use the device with
▶
incomplete or defective accessories.
Replace accessories before using
▶
the device.
→ "Accessories", page 29
Included in the Delivery
Description
Tumble dryer
Accompanying
documents
Water drain hose
with connection
adapter, confirm
ging material
and elbow.
→
"water drainage
feed hose",
Page 13