Table of Contents
Advertisement
9 Recording and playing function
1. Press rec to start recording, and the screen displays
In order to wait for the recording process, wait for the drum to trigger.
The rst time is to start recording, the metronome sounds, and the screen
displays
2. Press rec key again to stop recording.
10 Click function
1. Press the click button, the light will light up, and the metronome will sound at
the same time. Press the second time to turn o the metronome sound.
2. In click mode, press
The parameter is 30-250, and the default is 120.
11 Demo song function
1. Press the demo button, the light will light up, and the demo song will sound at
the same time. Press the second time to turn o the demo function.
2. In demo mode, press the "+" "-" key to select demo songs. There are 10 kits of
demo songs, which can be played at the same time when selected.
12 Drum parameter setting
1. Press and hold menu to enter the drum parameter setting interface
2. Press the < + > < - > key to select the parameters to be set:
S (drum sensitivity), T (drum threshold), C (crosstalk value),
R (repeated trigger value), U (force curve), l (drum volume).
3. Brie y press menu to enter the parameter adjustment. At this time, the interface
ashes (you can tap the drum and select the drum to be adjusted).
Press the < + > < - > key to adjust the parameters.
4. After adjusting the parameters, brie y press menu to exit the parameter
adjustment, return to the drum setting interface, and select other parameters to
be adjusted. At this time, the interface stops ashing
5. Press and hold menu to exit the drum parameter setting interface.
. At this time, recording begins
/
to adjust the metronome speed.
ashing.
www.PyleUSA.com
11
Advertisement
Table of Contents
