Click Setting; Kit Setting; Eq Setting; Efx Setting - Pyle PEDKITPR062 User Manual

5 Click setting

1. Press the menu key several times until the screen displays c.-4. At this
time, the display position of the screen point is above the click,
indicating that the metronome parameter adjustment mode is entered.
Press the "+" "-" key to switch the number of metronome beats.
Press to save the value and save it after power o .
Click is set with C-1/C-2/C-3/C-4/C-5/C-6/C-7/C-8/C-9
2. C stands for click metronome, 9 groups of metronome types
3. C-1 is 1/4 beat, C-2 is 2/4 beat, and so on (the default is C-4, 4/4 beat)
6 Kit settings
The boot defaults to kit setting. Directly press the "+" "-" key to switch the drum kit,
or press the menu key several times to display the display number (drum kit serial
number) and press the "+" "-" key to switch the drum kit

7 EQ setting

Press the menu key several times until the screen displays
display position of the screen point is above EQ, indicating that it enters the
reverberation parameter adjustment mode. Press the "+" "-" key to choose EQ
settings, and the EQ parameters are set to (EQ low, EQ middle, EQ high)
The display is
8 EFX settings
1. Press the menu key several times until the screen displays
At this time, the display position of the screen point is above the EFX, indicating
that the reverberation parameter adjustment mode is entered.
Press the "+" "-" key to switch the EFX setting
2. EFX parameters are set to reverse (room, plate, Hall) respectively.
The display is
three e ects are xed parameters.
10
www.PyleUSA.com
respectively, and the default is E-2.
f-1/f-2/f-3 (the default is F-1), and the
at this time, the
.