Table of Contents
Advertisement
*Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
Record on a Tape
1 Insert a tape with a record tab (p. 6).
This video recorder, equipped with HQ
* DECK power comes on.
(High Quality) system, is compatible
The VCR mode and "VCR" indicator light up
with existing VHS equipment. Only use
on Multi Function Display.
tapes with the NES] mark. Only tapes
tested and inspected for use in 2, 4, 6,
Press CH AY, or NUMBER keys
and 8 hour machines are
to select the channel.
recommended.
* For "LINE" input, see p. 35.
* If channels is over 100, press 100 key then press
the remaining 2 digits.
<p
Remove
loose or peeling
Press SPEED
labels from tapes
to select the record speed (p. 6).
to prevent tape jam.
SP = Standard Play
LP = Long Play
SLP = Super Long Play
+ Speed appears on-screen and on Multi Function Display.
Press REC
to start recording.
(The VCR REC indicator lights up on Multi Function
Display),
e To edit out unwanted scenes, press PAUSE/STILL
to pause, and again to resume recording.
* You cannot view another channel during recording.
Press STOP
to stop recording.
uone
--> Press REC repeatedly to set the recording length -->
(30 min. - 4 hours).
* DECK shuts off after the preset record length.
E Record one station, watch another,
--> press VCR/TV
("VCR" goes out on Multi Function Display),
--> select channels at TV (recording continues).
E One Touch Recording (recording in progress),
Gu
Rec —>0:30—> 1:00
4
ss
:00 4— 3:00 +-— 2:00 4— 1:30
--> insert a disc during recording,
Recording.
--> press DVD, and then press PLAY.
(Notesi
* It is not possible to record from DVD/ Video CD/
CD to VHS tape using DECK,
* Watching one channel and recording another
2 Select
Multi Function Display
is not possible when using Cable Box or
Channel.
DSS Receiver.
Ml Press STOP/EJECT to stop.
* After 5 minutes in Pause mode, DECK stops to
protect a tape and video heads.
Advertisement
Table of Contents
