Table of Contents
Advertisement
1
8 Troubleshooting
disruptions
resolve
S
K
You can resolve minor faults with the device yourself. Please consult before you
disruptions
resolve
S
contact customer service for information on troubleshooting. This way you
avoid unnecessary costs.
WARNING
Risk of electric shock! Improper repairs
are dangerous.
Only trained specialist personnel may carry out repairs on the device.
▶
Only original spare parts may be used to repair the device.
▶
If the power cord of this appliance becomes damaged, it must be replaced by
▶
the manufacturer, its service agent or a similarly qualified person to avoid
hazards.
Malfunction
The display is extinguished
andStart Refill
flashes.
"E:30 / -80"
Cause and troubleshooting
The energy saving mode is active.
Press any button. aThe display
▶
lights up again.
Drain pipe or water drain hose is clogged.
Clean the drain pipe and the water drain hose.
▶
Drain pipe or water drain hose is kinked or
trapped.
Make sure that the drain pipe and water drain
▶
hose are not kinked or trapped.
Water drain hose is connected too high.
Mount the water drain hose at a maximum height of 1
▶
meter.
Unauthorized extension mounted on the water drain
hose.
Remove unauthorized extensions from the water
▶
drain hose.
→
"Connecting the device", page 15
Drain pump is clogged.
→ "Clean the drain pump", page 35
▶
Pump cover not assembled correctly.
Reassemble the pump cover correctly.
▶
Pump cover is not fully screwed in.
Make sure that the pump cover is screwed into the
▶
device as far as it will go. The handle of the pump
cover must be vertical.
Troubleshooting
39
Advertisement
Table of Contents
