Environmental Protection And Saving; Ring; Disposal Of The Packaging; Efficient Use Of Energy And Resources - Siemens WM14N208NL User Manual And Installation Instructions

Table of Contents

Advertisement

Environmental protection and saving

Immediately remove all detergent
residues, spray residues or residues
upon contact with the device.
saving
and
protection
environmental
3 Environmental protection and
M
saving
saving
protection
Environmental
and

3.1 Disposal of the packaging

The packaging materials are
environmentally friendly and can be
reused.
Dispose of the individual
components separately by type.
3.2 Efficient use of energy
and resources
If you follow these instructions, your
device will use less electricity and
water.
Use programs with low temperatures
and longer washing times and use
the maximum load capacity.
aThe energy consumption and water
consumption are the most efficient.
Dose detergent according to the
degree of soiling of the laundry.
aFor a mild to normal degree
of contamination, a small amount
of detergent is sufficient. Follow the
dosage advice of the detergent
manufacturer.
12
Reduce washing temperature for
lightly and normally soiled laundry.
aAt low temperatures it consumes
device uses less energy. For light
to normal contamination, lower
temperatures than stated on the
care label are also sufficient.
Set the maximum speed if the
laundry is to be dried subsequently
in the tumble dryer.
aDryer laundry shortens the pro-
gram duration during drying and
reduces energy consumption. With
a higher spin speed, the residual
moisture in the laundry decreases
and the noise level of the spinning
increases.
Wash laundry without prewash.
aExtends washing with prewash
the program duration and increases
energy and water consumption.
The device has an automatic load
adjustment.
aThe automatic load adjustment
ming optimally adapts water
consumption and program duration
to the type of textile and load
capacity.

3.3 Energy saving mode

If you do not operate the device for a
long time, it will automatically switch
to energy saving mode.
The energy saving mode is exited
when you operate the device again.

Advertisement

Table of Contents
loading

Table of Contents