Advertisement
How to answer/end calls*:
Answer: While wearing the headset, lift the handset of the desk phone
and set it down next to the desk phone during a call.
End: Place the handset back on the dedicated handset area on the
desk phone.
*Ensure the Jabra base setting Open desk phone line when undocked is
set to "on". This will ensure an active link between the headset and the
base when lifting the handset off the desk phone, at any given time. If
you undock the headset and discover that the link has become inactive,
press the Multifunction (answer/end) button on the headset or base
(product dependent) to reactivate the link between the base and
headset.
Remote call control using the Jabra GN1000 remote handset lifter and
the Avaya handset port
Follow these steps to connect*:
1. Remove the Avaya handset cable from the handset port on the desk
phone.
2. Connect the Avaya handset cable to the handset port on the Jabra
base.
https://www.jabra.sg/supportpages/jabra-engage-65/9559-553-117/faq/73b24ef0-
09d8-4159-85be-93b2bc887a1a
08/03/2024 08:38
Page 2 of 4
Advertisement
