HoMedics CMTF45 Instruction Manual And Warranty Information page 6

TO FILL WITH A PITCHER
TO FILL AT THE FAUCET
MAX
MIN
1. Before filling with
water for the first
time, remove 1
demineralization
cartridge from the
packaging and soak in
water for 10 minutes.
Remove the top
cover and place in
the water tank.
1. Before filling with water
for the first time, remove 1
demineralization cartridge
from the packaging and
soak in water for 10
minutes.
3. Fill the tank with clean, cool
water or distilled water (if
in an area with hard water)
until the water is between
the MIN & MAX fill lines.
NOTE: Do not fill past the
MAX fill line.
CAUTION: Never add
essential oils or any other
additives to the water
tank. Even a few drops will
damage the unit.
MAX
6
2. Fill the tank with clean,
cool water or distilled
water (if in an area with
hard water) until the water
level reaches the MAX fill
line. NOTE: Do not fill past
the MAX fill line.
CAUTION: Never add
essential oils or any other
additives to the water
tank. Even a few drops
will damage the unit.
2. To fill at the faucet,
push the 2 side
push lock buttons
to remove the top
cover.
4. Place the soaked
demineralization
cartridge in
the water tank.
Replace the top
cover making sure
it is locked securely
to the water tank.