Pedal Input - Pyle PTED08 User Manual

18. Reset: Press and hold "PLAY/STOP" button, the screen displays "RES", means
to restore to factory default state.
19. Sleeping mode: The device will enter into "Sleep mode" and turns o
automatically if theres no activity in about 5 minutes. You need to restart the
device for normal use.
20. Low battery reminder: The red light is on when charging, red light is o when
fuIIy charged. When the battery power is low, the digital tube ashes sIowIy,
pIease charge the battery in time.
VIII. Pedal Input
1. This drum supports one Hi-hat pedal and bass drum pedal, both pedals are
mono input.
2. When the pedal is not plugged into the "FOOT PEDAL" jack, sound will be close
Hi-hat when you pIay; when the pedal is plugged in and you stepped on the
pedal it will be Open/Close hi-hat, close hi-hat if you're not stepping on the
pedal.
3. Insert the pedal jack to the "FOOT PEDAL" input for bass drum function.
Step on the pedaI to use it as bass drum.
IX. USB MIDI Function
Your drum module is USB class-compliant.
This means you can plug it into a USB class compliant host (such as Win XP/Vista/
7/8 and Mac OSX as well as many tablet devices), and it should be recognized
immediately. There are no drivers to install; simply plug n' play.
If you connect the drum module to a computer, you can trigger software programs
or record your performance into a MIDI sequencing application such as Sonar,
Cubase, Nuendo, Ezdrummer, VST/VSTi and all kinds of MIDI drum kit games.
www.PyleUSA.com
7