Pyle PKBRD6151PB User Manual page 4

REAR PANEL
II. Preparations before Playing
USING AC/DC POWER SUPPLY ADAPTOR
The AC/DC power supply adaptor must be the one designated for the instrument.
Please connect one side to the power supply socket on the back-panel and the
other to the city-power network. (Please notice the input voltage should be the
same as that of the power network.)
AUDIO OUTPUT HEADPHONE CONNECTION
•
Audio Output: Turn o the power supply of the electronic keyboard and external
sound equipment, then insert one end of the audio cable into the PHONES/OUTPUT
interface for audio output on the back of the electronic keyboard and insert the
other end into the audio input interface of the sound equipment.
•
Headphone Connection: Insert the headphone plug into the PHONES/OUTPUT
interface on the back of the electronic keyboard, then the speaker of the electronic
keyboard will be disconnected automatically, and the in uence on others can be
avoided during playing.
Attention! Do not keep the highest volume in a long time when the headphone is
used, so as to avoid hearing losses.
AUDIO INPUT
The electronic keyboard has the stereo audio input function, and audio signals of
mobile phones, MP3 players, computers and the like can be input into the electronic
keyboard system to be played. At rst, turn o the power supply of the electronic
keyboard, insert one end of the audio cable into the output port of an audio device,
insert the other end into the AUDIO INPUT interface on the back of the electronic
keyboard, and then turn on the power supply of the electronic keyboard.
4
www.PyleUSA.com