Table of Contents
Advertisement
Set-Up Features
(cont.)
Auto Power On
This feature allows the user to power up the TV at the
same time as the cable box (or other components). Of
course, the TV must be plugged into the cable box.
NOTE: When this feature
is activated
(on), Timer
features
will be disabled.
1.
Press (_.
2.
Press_
or_ _7and <_ or _
to highlight the Set-Up
Icon.
3.
Press 1_
to display the Set-Up Menu.
4.
Press _;_ to highlight AUTO POWER ON.
5.
Press _
or _
to select SET or OFF.
6.
Press _
twice to exit menus.
CO (Closed Caption) Mode
This Receiver has a built in decoder that provides a visual
depiction of the audio portion of a television program, in
the form of written words across the screen (White or
Colored
letters on a black background).
It allows the
viewer to read the dialogue of a television
program or
other information.
When the Closed Caption is in the OFF Mode:
The viewer may display closed caption by pressing
(_
on the remote control. Press again to delete.
1.
Press (_).
2.
Press _
or_;_ and _
or _
to highlight the Set-Up
Icon.
3.
Press(_
to display the Set-Up Menu.
4.
Press _
to highlight CC MODE.
5.
Press }_
to select OFF, C1, or C2.
6.
Press _
twice to exit menus.
Geomagnetic Corr (Correction)
NOTE: This feature is for Models CT-36G32/U
only.
This TV incorporatesa special feature for the convenience
of the customer. However, adjustment may be required
when the TV is moved (due to the influence of earth's
magnetic field) which may cause the picture to tilt slightly.
This adjustment is preset at the factory. If necessary, follow
these procedures to adjust the tilt.
1.
Press _----_.
2.
Press Z_ or_ ;7and <_ or _
to highlight the Set-Up
Icon.
3.
Press _
to display the Set-Up Menu.
4.
Press Z_ or_
to highlight GEOMAGNETIC
CORR.
5.
Press _
or_b to display the Geomagnetic Correction
adjustment menu.
6.
Press _
or _
to adjust the picture tilt until left and
right side of tilt adjustment bar is parallel to the bottom
of picture frame (if necessary).
NOTE: Discoloration may be visible in picture corners
if tilt bar is not parallel to the bottom of picture
frame,
tilt adjustment
bar
Press _
twice to exit menus.
Advertisement
Table of Contents
