Download Print this page

MAD XROTOR PRO ESC 60A Manual

Electronic speed controller

Advertisement

Quick Links

XROTOR PRO ESC 60A
4~6S
Electronic Speed Controller manual
Disclaimer
Thank you for choosing this product. Please carefully read this manual before using this product. Using this product will indicate you're agreed
with the all items in this manual. Please strictly follow these items during usage. We'll not commit any responsibility including but not limited to
indirect loss or joint responsibility caused by improper usage, private modification and other faults. The maximum compensation will be not
more than the cost of product itself.
Attention
This part has strong power. High speed running propellers have certain safety risk. User must be older than 18 years and have relative
professional knowledge.
Before usage, please carefully check if all the components are in good conditions.
Features
Quick response. it will take only 0.25 seconds from starting motor to full speed running.
Good compatibility and stability with special control algorithm for disc motors.
Synchronous freewheeling technology can bring better throttle linearity, driving efficiency.
When the motor decelerates, it can automatically recycle energy to reversecharge the battery to extend the flight time Have output interfaces
of RPM and error signal.
IP67 protective grade. Convenient installation screw holes without considering ESC part front and back sides.
ESC Protection Mechanism
Fast motor acceleration and deceleration response.
When the electrical speed controller rec eives a large throttle change in flight control, the maximum limiting current can be reached within
10mS, effectively improving the response speed.
Optimized heat dissipation design.
The power device adopts double-sided heat dissipation process, which can effectively reduce the thermal resistance between the shell, and
the measured maximum temperature of the internal device is only 15C higher than the surface temperature of the shell. The device life is
greatly improved under full load operation condition.
Perfect hardware self- check procedures.
When the electrical speed controller rec eives a large throttle change in flight control, the maximum limiting current can be reached within
10mS, effectively improving the response speed.
Integrated comprehensive protection functions.
Reliable blocking protection can guarantee the protection of motor and electric adjustment itself after abnormal explosion; Short circuit
protection can guarantee the burning fault caused by short circuit of motor line; Input PWM throttle identification protection,
can prevent the introduction of interference during maintenance of misoperation.
Electric modularization design.
Electric and motor, power line, signal line, lamp board line are completely separated, only need a screwdriver can be easily removed, quick
repair.
485 communication interface.
Provides firmware updates, in conjunction with the electrically tuned communication box to record data individually, or communicate with
the flight control. Improve the black box data record of the entire system to improve the accuracy of fault locating after sales.
Protection Function
First to connect motor with ESC, then to power on & adjust throttle to top, you will hear sound of beep for two times. Then adjust the throttle to
lowest, you will hear sound of Do Mi So, that means the throttle stroke has been set successfully.
V1.0

Advertisement

loading

Summary of Contents for MAD XROTOR PRO ESC 60A

  • Page 1 XROTOR PRO ESC 60A 4~6S Electronic Speed Controller manual V1.0 Disclaimer Thank you for choosing this product. Please carefully read this manual before using this product. Using this product will indicate you’re agreed with the all items in this manual. Please strictly follow these items during usage. We'll not commit any responsibility including but not limited to indirect loss or joint responsibility caused by improper usage, private modification and other faults.
  • Page 2 Change proper full power battery. every 1 second. Please cool down the ESC in a Beep beep, beep beep... ESC’s temperature is too high Temperature is higher than 110 ventilated place centigrade degree. every 1 second. MAD COMPONENTS 2023.02.28 V1.0 WWW.MAD-MOTOR.COM...