Download Print this page

HEIDENHAIN QAN 260M Replacing Instructions

Asynchronous motor

Available languages

Download this manual

Replacing Instructions

Asynchronous Motor

QAN 260 M

replacing QAN 4 S

Page 1 Replacing Instructions Asynchronous Motor QAN 260 M replacing QAN 4 S...
Page 5 Meaning of the Symbols Used This symbol indicates that one or more of the following dangers exist: Danger to workpiece Danger to fixtures Danger to tool Danger to machine Danger to persons This symbol indicates that important notes must be adhered to. This symbol indicates that you can find detailed information in another manual.
Page 6: Hardware Compatibility
The QAN 4 S asynchronous motor is not available any more. It is replaced by QAN 260 M. Caution! Hardware compatibility: The QAN 260M is compatible to the QAN 4S in its mounting dimensions and electrical specifications! Adaptations required in the HEIDENHAIN control: After installation of the QAN 260M, the HEIDENHAIN control still needs to be adapted.
Page 7 Input values in the motor table for QAN-260M-8000 TYPE NAME MODE QAN-260M-8000 1500 51.4 XStr1 XStr2 N-FS N-MAX 15.6 11500 8300 1700 8000 %-XH DIRECT T-MAX I-MAX 0.006 1024 T-DC F-DC T-AC F-AC Tth1 Rth1 15000 0.07 Tth2 Rth2 5000 1885 The motor table in older NC software versions contains less columns.
Page 8 677 728-91 · Ver00 · 0.5 · 2/2009 · S · Printed in Germany...