Table of Contents
Advertisement
Tonearm section
Highly sensitive universal tonearm
Highly sensitive universal tonearm of the gimbal suspension
system in which precision pivot bearings are employed at the
horizontal and vertical journals of the tonearm has made it
possible to
r e a l i z e arm friction of 7 mg. Therefore, the
performance of the high-compliance cartridge can be ful
realized.
Furthormore, the tonearm base is integrally formed with a die-
cast zine alloy finish of high specitic gravity to lend sufticient
strength and weight and thus completely eliminates undesirable
vibrations.
WMbiecast aluminum head shett
'The head shell integrally formed by strong diecast aluminum
for reduction in weight is protected from harmlul head shelt
resonance. Additionally, the head shell terminats are gold:
plated for prevention of contact faults at replacement.
MViscous damped cueing
To prevent damage to the stylus tip and records liable to
take place during operation of the tonearm, a cueing device
damped with viscous o i t is adopted.
Since the tonearm can be r a i s e d of lowered through operation of
location of a desired playing portion or temporary
19 of the playing are conveniently achieves
MAnti-skating controt
Proper outside force can be applied by such a simple opera-
(on as aligning tho knob with the same valve as the stylus
pressure, thus cancelling the skating force harmful to the stylus
tip.
MLow-capacitance phono cables
that will not Impair the high>
frequency characteristics
of the cartridge
Specifications
Turntable section
Type.
Direct Drive Automatic Turntable
'System, Automatic return
'Automatic shut-off
Drive method
Direct Drive
Motor
'Back Electromotive Force Frequency
Generator servo OC motor
'employing one chip IC
'Turntable platter
'Aluminum die-cast, 33 em (13")
Turntable speeds
38-1/3
and 45 r.p.m.
Pitch controts.
Individual adjustment controls, 10%
adjustment range
0.025% W.R.M.S, (JIS 5521)
0.035% Weighted zero to peak
(oN 45507)
50 4B (OIN 45599)
~73.d8 (OIN 485398)
Wow
and flutter
Universal tubular arm, static-
balanced type
230 mm (9-1/16")
45 mm (19/32")
7 mg (horizontally and vertically)
22.9 (6.0 g
cartridge weight
1.75 gstylus pressure)
'Tracking error angle
Within +3" (atthe point of 145
[rm ro
the centre
within +1" rat the point of 55
[rm teares om]
the centre
Otfset angie.
as"
Adjustable stylus pressure
range
0 10 3.9 (stylus pressure direct
'reading typo)
Cortridge weight range. Sto 11.9
Head shelt weight
959
General
Power supply
'AC 120 V, 50/60 He
Power consumption
Dimensions
(HW xo)
%A7-12/16 ¥ 14.9/16 inches
Weight
8B kg (19.4 Ibs.)
'Weight and dimonsions shown are approximate,
'Specifications
subject to change without notice.
Matsushita Electric of Canada Limited
40 Ronson Drive, Rexdale, Ontario, M9W 1B5
Telephone:
(416) 248-5551
Printed in Japan
'SFNUI7OCO1
'8127600
Advertisement
Table of Contents
