Advertisement
UNINET IMAGING INC. • SAMSUNG ML 1630 CARTRIDGE REMANUFACTURING INSTRUCTIONS
22. Slide the developer roller over, and lift out to remove.
24. Make sure the doctor blade sealing foam and the develop-
er rollers seals are clean and intact.
23. Remove the 2 screws from the doctor blade, remove the
blade.
Clean out all the remaining toner from the hopper.
25. Clean the doctor blade edge so there is no evidence of
build up along the edge. If any buildup exists, the cartridge will
streak. This blade can be cleaned with your preferred
Samsung DB cleaner.
Advertisement
