Pioneer CT-S88R Service Manual page 7

Beit Replacement Capstan Motor Replacement
1. Remove The Tape Transport Unit from The Chassis 1. Remove The Tape Transport Unit from The Chassis (See page 6.)
(See page 6.)
. Remove The Motor Bracket 2. Disconnect The Motor Lead Wires from The motor
Undo screws in all four coners to remove the motor bracket
from the chassis.
eo
[/ Disconnect motor lead wires
/}
3. Remove The Motor Bracket
(See step 2 in previous procedure.)
4. Remove Bracket from The Motor, and Replace The Motor
Capstan motor
3. Replace The Belt, and Reassemble in The Reverse Order
Motor bracket
Capstan belt
{——_—__
. Reassembie in The Reverse Order
(Making sure that the motor is mounted in the correct
direction.)
. Adjust Tape Speed