Home Accents Holiday 23PG90042 Assembly Instructions

TM
NEED HELP?
CALL: 1-855-HDHoliday (1-855-434-6543)
Monday - Friday 8am to 7pm EST, Saturday 9am to 6pm EST
NOTE: DEMO MODE ACTIVATED
Please reference "Demo Mode Instructions" for more details.

Safety Information

IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should always
be followed, including the following:
READ AND FOLLOW ALL
a.
SAFETY INSTRUCTIONS.
b. Do not use seasonal products outdoors unless marked suitable
for indoor and outdoor use. When products are used in outdoor
applications, connect the product to a Ground Fault Circuit
Interrupting (GFCI) outlet. If one is not provided, contact a
qualified electrician for proper installation.
c. This seasonal product is not intended for permanent installation
or use.
d. Do not mount or place the product near gas or electric heaters,
fireplaces, candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or nails,
or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when retiring for
the night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of fire,
burns, personal injury and electric shock it should not be played
with or placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire, or light
string.
k. Do not close doors or windows on the product or extensions
cords as this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any material that
is not a part of the product when in use.
m. This product is equipped with push-in type lamps. Do not twist
lamps.
n. Read and follow all instructions that are on the product or
provide with the product.
SAVE THESE INSTRUCTIONS
o.
DO NOT RETURN TO STORE.

Pre-Assembly

Package Contents

Part Description
A Tree top
B Tree center, Sticker 2
C Tree bottom, Sticker 1
D Tree stand
E Remote Control

Assembly

Assembling the tree stand

Step 1. Choose a location near a wall outlet.
Step 2. Unfold the legs of the tree stand and lay the stand on
the floor.
Step 3. Slide the locking disk of the tree stand down until it
snaps into place.

Assembling the tree

This tree assmbles with Quick Set® feature
---Set up and light up your tree in less than 10 minutes!
Step 1. Remove the protective caps from the tree bottom and
insert the pole into the tree stand.
Note: Do not step on the tree stand legs during the setup.
This may deform the tree stand and may result in an
unbalanced tree.
Step 2. Continue by inserting the upper tree section(s) to the
lower section(s) until inserting the tree top.
Step 3. Shape the branches to your preference by working from
the bottom to the top. When adjusting branches, ensure
that all wires are free of branch hinges.
Step 4. Insert the adapter into the wall outlet. All your lights
should now be lit.
Step 5. Shape the tree from the bottom to the top. Start with the
branches farthest from the pole – fan out in a star shape,
and continue until the entire tree is shaped.
Top view
Step 6. When finished shaping the branches, slightly upsweep
all branch tips for a uniform look.
Christmas Tree
Model: 23PG90042
Sku # 1005 273 009
Quantity
1
1
1
1
1
Side view