Operating An External Unit Connected To This System - Yamaha GX-505VCD Owner's Manual

Operating an external unit connected to this system

1 2 3
DISC DISC DISC
3–DISC VCD CHANGER
STANDBY
STANDBY
/ON
TIMER
INPUT PRESET/TUNING/BAND A/B/C/D/E
/
BASS TREBLE
REC/ AUTO/
PHONES MODE DOLBY NR PAUSE MANUAL MEMORY
TIMER
DIRECTION
KARAOKE
OPEN/CLOSE
AUTO REVERSE CASSETTE DECK DOLBY B NR
1 1
TIME INDEX TIME INDEX
DIRECTION
TAPE
REC/ PAUSE
KEY/ECHO
YMERSION MUSIC
SLEEP
3, 2 2
VOLUME
DISC CHANGE OPEN/CLOSE
VIDEO CD
DIGITAL VIDEO
Version 2.0 / Playback Control
YMERSION B.BOOST MUSIC
VOLUME
1
UP
DOWN
2
RANDOM REPEAT TIME DISPLAY
TIME ADJ HOUR MIN
3
MIC MIXING
1 MIC 2
MIN MAX
3, 2 2
You can record a source or a program played on the built-in CD/
Video CD player, tape deck or tuner by the MD recorder, tape deck
(DAT), etc. that are connected to the AUX/MD terminals on the
rear of the main unit.
1 1
2 2
INPUT
1, 1 1
3 3
Note
• Your singing karaoke can be recorded in the karaoke mode. (Refer to
• A digital-to-digital recording is possible from a CD played on the built-in
Use an external unit connected to the AUX/MD terminals on the
rear of the main unit.
To listen to or watch a source played on an
external unit connected to this system
Press INPUT (or INPUT on the remote control) until
or
"AUX/MD" appears on the display.
Play the source.
Adjust the volume to the desired level by using VOLUME.
* If you prefer, you can control the sound quality (Refer to
pages 30–31) or enjoy singing karaoke (Refer to pages 32–
33).
To record a source played on this system by
using the MD recorder, tape deck etc.
connected to this system
Select the source (VCD/CD, TAPE or TUNER) you want to
record by using INPUT
control) .
Play the source and then turn VOLUME up to confirm the input
source.
Begin recording on the MD recorder, tape deck (DAT) etc.
page 33 for details.)
CD/Video CD player to an MD (or tape) on the MD recorder (or DAT)
by connecting the DIGITAL OUT (OPTICAL) terminal on the rear of
the main unit to the MD recorder (or DAT).
For Video CDs
*
When a Video CD is played, no digital signal is outputted
from the DIGITAL OUT terminal.
(or INPUT on the remote
or
-29
E