Advertisement
STEP 5 Erase the memory by typing: NEW
then press
The display will show:
READY
STEP 6 Type:
LIST
then press
The display will show:
READY
indicating that the memory is
\
blank.
STEP 7 Rewind the cassette by
pressing REWIND,
then STOP
when the tape is at the
beginning.
STEP 8 Type:
LOAD TEST"
the display will show:
for VIC
PRESS PLAY ON TAPE
for PET/CBM
PRESS PLAY ON TAPE No. 1
After obeying the command,
the display will show:
OK
SEARCHING FOR TEST
and after a short while:
FOUND TEST
LOADING
READY
Note:
If the computer displays:
LOAD ERROR
try the LOAD command a few
more times, but if the
message repeats, turn to the
last page.
STEP 9 Type:
LIST
:
and press
Now
the display will show that the
memory has received the
program '"'TEST"' by
displaying
10 PRINT'THIS IS A TEST"
READY
If all of the preceding steps have been successfully completed, your
DATASSETTE™ has been properly checked and is ready to go to work. The
Ef,
commands to use the DATASSETTE™
are described later in this manual.
NOTE:
If any of the above steps does not work, turn to the last page of this
manual.
—————_
=
!
Advertisement
