Advertisement
DATASSETTE™ OPERATION
Commands
Here are the commands that will activate your DATASSETTE™ . Simply
type the desired command and press | seu
In the list of commands
below, NAME stands for the name that you, the user, assign to your
program. You should select a name that will distinguish that program from
other programs (or data files) on the same tape. The nameeshould have a
meaning to you. PROG1, PROG2, etc., are not good choices because they are
not distinctive.
A program name can be no more than 16 characters long.
SAVE" NAME"'
will SAVE a program by storing it on the DATASSETTE™ .
Example: SAVE''TEST"'
will SAVE the program TEST on to the DATASSETTE™ .
NOTE:
Simply typing SAVE will store the prgram without_a name on the
cassette.
LOAD''NAME"'
will LOAD the program NAME from tape. All other programs on the same tape
will be ignored.
Example:
LOAD TEST"
will LOAD the program TEST from the cassette.
If LOAD is typed, then the first program found on the cassette will be
LOADed.
11
Advertisement
