Dexibell VIVO S4 Owner's Manual page 17

Effects for Orchestral Sounds
You have two AUDIO FX processor for each part (MAIN,
COUPLED, LOWER and BASS).
1.
Use the [FX SELECT] buttons to select which AUDIO FX processor (A, B or C)
you want to control for the Main, Coupled, Lower and Bass part. To select
the AUDIO FX C processor, press the buttons [A] and [B] at the same time.
The buttons [ON] and the control knobs (C1-C2, C3-C4, C5-C6) are assigned
to the AUDIO FX processor you selected (A, B or C).
2.
Use the [ON] buttons to switch ON/OFF the AUDIO FX processors for the
relative parts (Main, Coupled and Lower/Bass).
3.
Use the C1/C2, C3/C4, C5/C6 control knobs to adjust the parameter value of
the effect related to the current tone.
T2L Editor
1.
Press this button to open the T2L page
and personalize the sounds of the
instrument.
Function Buttons
1.
Press these buttons to select
functions/options shows at the
bottom of the display.
Adjust the Volume and Reverb
1.
Use these buttons to enable the control knobs
C1~C6 to adjust the volume and the reverb
value for the Main, Coupled, Lower and Bass
parts.
Menu/Exit button
1.
Press this button to open and close the
menu page where you can view and select
all available functions.
Data Entry/Song Volume
When a parameter is selected this
knob works as Data Entry. When the
instrument is in song mode, this knob
allows you to set the volume of the song
player.
Quick Guide
17