Table of Contents
Advertisement
2.
Enter http://netgear.aircard or http://192.168.1.1.
A login screen displays.
3.
Enter the password in the Sign In field.
The default password is password. The password is case-sensitive.
4.
Click the Sign In button.
5.
Select Settings > Router > Basic.
6.
In the DMZ section, select the DMZ Enabled On radio button.
7.
In the DMZ Address field, enter the IP address of the computer to which you want all data
sent.
If the hotspot is tethered using a USB cable, this address is 192.168.1.4. If the hotspot is
connected using WiFi, the first WiFi client's IP address is usually 192.168.1.74.
The Submit button displays after you make a selection.
8.
Click the Submit button.
Your changes are saved.
AirCard 785 Mobile Hotspot
Advanced Settings
55
Advertisement
Table of Contents
