Related Manuals for ParkerBrand PGB-2600
Summary of Contents for ParkerBrand PGB-2600
- Page 1 LEAF BLOWER / VACUUM LEAF BLOWER / VACUUM P G B ( V ) - 2 6 0 0 / 2 8 0 0 O W N E R S M A N U A L...
-
Page 2: Table Of Contents
The information contained in this manual was accurate at the time MAINTENANCE ..................39-41 of production, however Parker Products Ltd. may make modifications to the Thank you TROUBLESHOOTING ................42-43 product without notification. ParkerBrand ONLINE RESOURCE LIBRARY .............. 44-45 SPECIFICATION ..................48-49 GUARANTEE ................... 50 DECLARATION OF CONFORMITY ............51... -
Page 3: General Safety
GENERAL SAFETY GENERAL SAFETY WARNING RESPIRATOR To reduce the risk of injury, user must read instruction Protect you lungs against dust. manual. • READ THIS MANUAL CAREFULLY BEFORE USING THIS MACHINE. • Never use this machine if it has been damaged of is in need of replacement parts. CAUTION! GLOVES FUEL FILLER POINT... -
Page 4: Safety Symbols
SAFETY SYMBOLS SAFETY SYMBOLS This symbol indicates a PRECAUTION, a WARNING RISK OF INJURY. DO NOT OPEN OR To reduce the risk of injury, a DANGER. Ignoring this warning can lead to an accident WARNING! REMOVE SAFETY SHIELDS WHILE user must read instruction manual. for yourself or for others. - Page 5 SAFETY SYMBOLS SAFETY SYMBOLS WASTE ELECTRICAL PRODUCTS SHOULD NOT BE Never to touch the spark plug or plug cord WARNING! DISPOSED OF WITH HOUSEHOLD WASTE. PLEASE while the engine is in operation. Doing so may result in HOT SURFACES WILL BURN FINGERS OR PALMS. RECYCLE WHERE FACILITIES EXIST CHECK YOUR being subjected to an electrical shock.
-
Page 6: For Safe Operation
FOR SAFE OPERATION FOR SAFE OPERATION WARNING! • • Always wear foot protection. Do not go barefoot or wear sandals. Avoid spilling fuel or oil. Wipe up fuel spills before starting engine. • Failure to follow all Safety Rules and Precautions can result in serious Use your unit as a vacuum for: •... - Page 7 • or sticks to be thrown or to ricochet which can hurt people or animals, Use oFSd ParkerBrand replacement parts; use of any other parts may break glass, or cause other damage. void your warranty and cause damage to your unit. Empty fuel tank •...
-
Page 8: What's In The Box
WHAT'S IN THE BOX - PGB(V) - 2600 / 2800 PARTS DEPICTED ON THIS PAGE ARE PROVIDED WITH VACUUM VARIENTS ONLY - WHAT'S IN THE BOX PARTS PROVIDED WITH ALL 2600 & 2800 MODELS PARTS PROVIDED WITH VACUUM VARIENTS ONLY *Products depicted on this page are for illustration purposes only, models may vary slightly. -
Page 9: Product Features
PRODUCT FEATURES - PGB(V) - 2600 / 2800 PGB(V) - 2600 / 2800 - PRODUCT FEATURES *Products depicted on this page are for illustration purposes only, models may vary. *Products depicted on this page are for illustration purposes only, models may vary. -
Page 10: Pre-Operation
PRE-OPERRATION PRE-OPERATION INSPECT THE LEAF BLOWER EXHAUST THE EXHAUST AND SURROUNDING AREA WILL GET THIS FUEL MUST BE EXTREMELY HOT WHILE IN USE. MIXED WITH 2 STROKE CARE SHOULD BE TAKEN TO ENSURE NO OBJECT OR BODY PART MAKES CONTACT WITH THIS AREA. OIL AT A 40:1 RATIO (PETROL:OIL) 40:1... -
Page 11: Blower Assembly
BLOWER ASSEMBLY BLOWER ASSEMBLY ALIGN & CONNECT BLOWER PIPES TWIST & LOCK PIPES TOGETHER REMOVE SECURING SCREW ATTACH PIPES TO MACHINE REPLACE SECURING SCREW Locate blower pipes A&B and connect the two blower pipes. Once the lug is pushed all the way into the locator twist the Remove the securing screw from the lug on the Align the lug on the main body with the lug locator Once the pipes are located correctly replace the... - Page 12 BLOWER ASSEMBLY ATTACH SHOULDER STRAP ADJUST THE SHOULDER STRAP ISSUES STARTING YOUR 2600? THIS PAGE HAS INTENTIONALLY BEEN LEFT BLANK SAFETY SWITCH ENGAGED? Attach the shoulder strap to the front of the top Adjust the strap until the machine sits comfortably handle near the switch.
-
Page 13: Vacuum Assembly
VACUUM ASSEMBLY VACUUM ASSEMBLY ALIGN & CONNECT INTAKE PIPES TWIST & LOCK PIPES TOGETHER REMOVE FAN COVER SCREW ATTACH INTAKE PIPES TO BODY Locate intake pipes pipes C&D and connect the two blower Once the lug is pushed all the way into the locator twist the Remove the securing screw from the fan cover on the main Align the lug on the main body with the lug locator on the pipes. - Page 14 VACUUM ASSEMBLY VACUUM ASSEMBLY ALIGN, TWIST & LOCK ISSUES STARTING YOUR 2600? COMBINE DISCHARGE PIPE E & BAG ENTER TEXT TO PREVENT DAMAGE TO BAG ENSURE ‘DISCHARGE PIPE E’ IS FULLY PULLED THROUGH THE BAG AS ILLUSTRATED BELOW SAFETY SWITCH ENGAGED? Twist and lock the intake pipes so they securely lock on to Fully open the zip on the side of the bag.
- Page 15 VACUUM ASSEMBLY VACUUM ASSEMBLY REMOVE SECURING SCREW ATTACH DISCHARGE PIPE TO BODY TWIST & LOCK PIPE ON TO BODY REPLACE SECURING SCREW Remove the securing screw from the lug on the main body. Align the lug on the main body with the lug locator on the Twist and lock the discharge pipe so it securely locks on to Once the discharge pipe is located correctly replace the discharge pipe and slide it on to the body.
- Page 16 VACUUM ASSEMBLY VACUUM ASSEMBLY SHOULDER STRAP STRAP ATTACHING POINTS REAR HANDLE ATTACH FRONT HANDLE ATTACHMENT USE REAR HOOK OF BAG STRAP INSTALLED CORRECTLY It is important to use the adjustable strap whilst There are two strap attachment points located on If you are of a taller stature the rear attachment If you are of a shorter stature the front attachment Attach the other end of the strap to the rear securing...
-
Page 17: Filling The Fuel Tank
FILLING THE FUEL TANK FILLING THE FUEL TANK REMOVE FUEL CAP ALWAYS MIX FUEL TO CORRECT 40:1 RATIO (PETROL:OIL) FILL THE FUEL TANK DRAIN THE FUEL AFTER USE Allow the engine to cool then thoroughly clean the 40:1 RATIO machines exterior before storage. PETROL (L) OIL (ML) Inspect the entire machine especially the fuel lines for... -
Page 18: Starting The Engine
STARTING THE ENGINE - PLEASE FOLLOW THE STARTING GUIDE CAREFULLY! PLEASE FOLLOW THE STARTING GUIDE CAREFULLY! - STARTING THE ENGINE PRIME THE CARBURETTOR COLD START PROCEDURE STEP 1 COLD START PROCEDURE STEP 2 OPEN CHOKE PULL RECOIL STARTER PULL TWICE ONLY! The engine switch is spring loaded. -
Page 19: Flooded Engine Procedure
FLOODED ENGINE PROCEDURE ADJUSTING IDLE SPEED DISCONNECT THE COIL PACK REMOVE SPARK PLUG INSTALL SPARK PLUG IDLE SPEED ADJUSTMENT SCREW ADJUST ENGINE IDLE SPEED Disconnect the spark plug lead carefully by pinching Remove the spark plug using the spark plug Install the spark plug and firmly tighten up with the Start the engine by following the procedures described in Use a screwdriver to adjust engine idle speed to 3000±200r/... -
Page 20: Stopping The Engine
STOPPING THE ENGINE MAINTENANCE SPARK PLUG MAINTENANCE STOPPING THE ENGINE SET SPARK PLUG GAP • Once the engine has cooled, twist off the spark plug • cover/coil pack lead. LET THE ENGINE COOL. Allow the engine to cool by running it at idle for 2 or 3 minutes. •... -
Page 21: Maintenance
MAINTENANCE MAINTENANCE WARNING! EVERY 10/15 HOURS STORAGE (30 days or longer) • Before performing any maintenance on this machine, stop the engine and Use the spark plug wrench to remove the plug (turn anti-clockwise to • Cleaning - Thoroughly clean the machine exterior disconnect the spark plug cap. -
Page 22: Troubleshooting
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION PROBLEM POSSIBLE CAUSE SOLUTION Worn Parts Contact: help@parkerbrand.co.uk There is no fuel in the tank Add fuel to the tank Worn piston Contact: help@parkerbrand.co.uk The fuel filter is dirty Clean the filter The engine stutters Worn connector rod bearing Contact: help@parkerbrand.co.uk... -
Page 23: Online Resource Library
2600 2600 2600 2800 2800 2800 TO 2600 RESOURCES TO 2800 RESOURCES • No resources for your product? Don't worry we are adding new content all the time. • If you require help/advice with your product contact us via email at help@parkerbrand.co.uk... - Page 24 We know that taking care of our customers in a helpful and straightforward manner is much appreciated, just as you, our customer are appreciated in turn. 2600 SPARES 2800 SPARES Thank you for buying ParkerBrand we are here if you need us, be sure of it. (+44) 01507 499198 help@parkerbrand.co.uk www.parkerbrand.co.uk...
-
Page 25: Specification
Level of vibration of the secondary handle (ISO 22867) (K=yy m/s2) (m/s2) Dry weight (kg) Dry weight (kg) *All measurements are approximate. *All measurements are approximate. If you require further information please contact ParkerBrand directly If you require further information please contact ParkerBrand directly... -
Page 26: Guarantee
26cc / 28cc Blower Vacuum ☑ EN 15503:2009+A2:2015 ☑ EN ISO 12100:2010;Annex 1 of 2006/42/EC Model/Type: PGB-2600 / 2800 / PGBV-2600 / 2800 Conformity Assessment Procedure: Manufacturing Date/Serial Number: 2023 2000/14/EC amended by 2005/88/EC - Annex VI... - Page 27 P G B ( V ) - 2 6 0 0 / 2 8 0 0 August 2023 Rev 1.0...