Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ParkerBrand PBLB-6500-B
Summary of Contents for ParkerBrand PBLB-6500-B
- Page 1 BACKPACK LEAF BLOWER P B L B - 6 5 0 0 - B O W N E R S M A N U A L...
-
Page 2: Table Of Contents
INTRODUCTION CONTENTS GENERAL SAFETY ........................4-5 This manual has been produced by Parker Products Ltd. and should be kept with the product and referenced SAFETY SYMBOLS ........................6-7 for operation, maintenance and troubleshooting. FOR SAFE OPERATION ......................8-11 WHAT'S IN THE BOX? ......................12-13 This manual contains an overall description of the product, together with all the necessary information for using the PRODUCT FEATURES ...................... -
Page 3: General Safety
GENERAL SAFETY GENERAL SAFETY For safe operation and maintenance symbols are moulded in relief on the machine or shown on a label. • READ THIS MANUAL CAREFULLY BEFORE USING THIS MACHINE. • FAILURE TO FOLLOW SAFETY PRECAUTIONS OR INSTRUCTIONS CAN CAUSE EQUIPMENT DAMAGE •... -
Page 4: Safety Symbols
SAFETY SYMBOLS SAFETY SYMBOLS WARNING! To reduce the risk of injury, DO NOT TOUCH THE MOVING PARTS OF THE DANGER! Petroleum spirit is highly flammable. WARNING! For outdoor use only. user must read instruction manual. No smoking or naked light. MACHINE UNTIL THEY ARE COMPLETELY STOPPED. -
Page 5: For Safe Operation
FOR SAFE OPERATION FOR SAFE OPERATION • • IMPORTANT SAFETY INFORMATION Dress properly. Do not wear loose clothing or jewellery. Contain Use the correct leaf blower for your application. The correct leaf CHECK THE GENERAL CONDITION OF THE LEAF BLOWER •... - Page 6 FOR SAFE OPERATION FOR SAFE OPERATION GENERAL SAFETY INSTRUCTIONS and other equipment during operation. MAINTENANCE CAUTION - engine speed has been factory set to provide safe operation • • Leaf blowers are designed to give safe and dependable service if Do not enclose the leaf blower in any structure.
-
Page 7: What's In The Box
WHAT’S IN THE BOX WHAT’S IN THE BOX OPERATION LEAF BLOWER MAIN UNIT +65CC 2 STROKE ENGINE LARGE SMALL +FUEL TANK CLAMP CLAMP +STARTER RECOIL +THROTTLE ASSEMBLY +EXHAUST +AIR FILTER FLEXIBLE THROTTLE STRAIGHT BLOWER FUEL MIX BOTTLE TOOL KIT HOSE TUBE &... -
Page 8: Product Features
PRODUCT FEATURES PRODUCT FEATURES COIL STRAIGHT GRAB PACK PIPE HANDLE COMFORTABLE FILTER PADDING CHOKE RECOIL LEVER STARTER EXHAUST FUEL FLEXIBLE PADDED ADJUSTABLE TANK HOSE SHOULDER STRAPS... - Page 9 PRODUCT FEATURES PRODUCT FEATURES THROTTLE SHOCK ASSEMBLY ABSORBERS PRIMER BLOW BUBBLE NOZZLE...
-
Page 10: Inspection
Fully inspect the Leaf Blower before use. Ensure all correct parts are supplied with the product. If any parts are missing/damaged or for support contact ParkerBrand customer services directly on 01507 499198. - Page 11 ASSEMBLY ASSEMBLY TWIST AND SLIDE THROTTLE ON TO RAIL SLIDE THROTTLE TO THE BASE OF TUBE ATTACH FLEXIBLE TUBE TO ELBOW TIGHTEN CLAMP Rotate the throttle assembly again and align it with With the throttle assembly aligned with the centre Attach the flexible tube to the elbow on the main Secure the flexible tube to the elbow using the tube the centre rail on the throttle tube.
- Page 12 ASSEMBLY ASSEMBLY ATTACH THROTTLE TO FLEXIBLE TUBE TIGHTEN CLAMP ATTACH STRAIGHT PIPE TO THROTTLE TWIST AND LOCK STRAIGHT PIPE Attach the throttle tube and throttle assembly to Secure the throttle tube to the flexible tube using Connect the straight pipe to the throttle tube. Once the lug is pushed all the way into the locator the Flexible tube.
- Page 13 ATTACH NOZZLE TO STRAIGHT PIPE TWIST AND LOCK NOZZLE The illustration shows exactly how the PBLB-6500-B will look if the assembly instructions are followed correctly. Connect the blower nozzle to the straight tube. Once the lug is pushed all the way into the locator twist the pipes in opposite directions, this will lock Firstly align the lugs with the lug locators.
-
Page 14: Adjustable Straps
ADJUSTABLE STRAPS ADJUSTABLE STRAPS TIGHTEN SHOULDER STRAPS PULL STRAP LOOSEN SHOULDER STRAPS PULL STRAP To tighten the shoulder straps first locate the Simply pull the metal hoop the tighten the strap To loosen the shoulder straps first feed the strap With slack now on the strap with the metal loop pull metal hoop on the strap below the metal buckle. - Page 15 ADJUSTABLE STRAPS ADJUSTABLE STRAPS TIGHTEN WAISTBAND LOOSEN WAISTBAND SECURE STRAP RELEASE WAISTBAND SNAP BUCKLE LOCK WAISTBAND SNAP BUCKLE To release the waistband snap buckle compress To lock the snap buckle simply slide the three To tighten the waistband pull the strap away To loosen the waistband pull the strap away To secure the strap in place loop the strap the two tabs on the side of the snap buckle.
-
Page 16: Filling The Fuel Tank
ADJUSTABLE STRAPS FILLING THE FUEL TANK FRONT VIEW SIDE VIEW REAR VIEW REMOVE FUEL CAP USE FUNNEL IN TANK OPENING FILL FUEL TANK With the shoulder straps and waistband The leaf blowers main body should sit parallel The top of the Leaf blower main body should sit Place the machine on the ground or on a sturdy Place the funnel into the fuel tank filler neck to Fill the tank with clean, fresh pre-mixed 40:1 fuel... -
Page 17: Starting The Engine
STARTING THE ENGINE STARTING THE ENGINE PRIME THE CARBURETTOR TURN THE ENGINE ON CLOSE THE CHOKE PULL STARTER RECOIL OPEN CHOKE PULL STARTER RECOIL Prime the carburettor by pressing the primer The On/Off switch is spring loaded. Its default Move the choke lever downwards to the Place the machine on the ground and hold Move the choke lever upwards to the open Pull the starter recoil upwards rapidly until... -
Page 18: Using The Throttle
USING THE THROTTLE USING THE THROTTLE USING THE THROTTLE THROTTLE LOCK THROTTLE TRIGGER SETTING HALF THROTTLE ENGAGE AUTO REV SWITCH RELEASE THROTTLE TRIGGER To use the throttle correctly you are required With the heel of your hand press on the With the throttle trigger now unlocked use To set the leaf blower at half throttle unlock With the throttle engaged press the Auto... -
Page 19: Stopping The Engine
USING THE THROTTLE STOPPING THE ENGINE HALF THROTTLE IS NOW SET DISENGAGE AUTO REV SWITCH RELEASE THE THROTTLE TRIGGER TURN THE ENGINE OFF Release the throttle trigger. Move the On/Off switch to the Off (O) position. This will Half throttle is now set and the engine will To disengage the auto rev switch simply When you pull on the throttle trigger the cut the power to the engine. -
Page 20: Maintenance
MAINTENANCE MAINTENANCE SERVICING THE AIR FILTER REMOVE AIR FILTER COVER REMOVE FILTER FROM COVER REMOVE FILTER FROM FILTER HOUSING Remove the air filter retaining knobs. Turn them in With the retaining knobs removed the air filter Remove the sponge element from the filter cover. Remove the filter from the filter housing. - Page 21 Use the spark plug wrench provided in Check the spark plug gap (A), it should be remove the spark plug lead. The spark plug the PBLB-6500-B tool kit to remove the between 0.60 and 0.70 mm. lead can easily be removed by hand.
- Page 22 CLEANING Make sure to always stop the engine, remove the spark plug lead and carburettor, contact ParkerBrand directly. Adjustment of the carburettor Proper storage preparation is essential for keeping your machine 1. If the engine has been running, allow it to cool for at least an hour make sure that all moving parts have stopped before performing any is complicated.
- Page 23 MAINTENANCE MAINTENANCE REMOVAL FROM STORAGE DRAINING THE FUEL TANK AND CARBURETTOR CHECK THE AIR FILTER CHECK THE SPARK PLUG Check the machine is as described in the PRE-OPERATION chapter of 1. Place an approved petrol container below the carburettor and use a Obstruction of the air filter will cause engine problems.
- Page 24 MAINTENANCE TRANSPORTATION INFORMATION ABOUT DISPOSING & RECYCLING Always stop the engine when you transport the machine to a Dispose of your equipment in an ecological manner. Machines should different work area. Stop the engine and let it cool down for 15 minutes not be disposed of along with domestic waste..
-
Page 25: Troubleshooting
ENGINE WILL NOT IDLE Carburettor needs adjustment Contact ParkerBrand. The cylinder is damaged Contact ParkerBrand The engine does not turn Seized engine Contact ParkerBrand If this does not solve your problem, please contact the ParkerBrand customer service department 01507 499198. - Page 26 SPRING SCREW PLUG WASHER PISTON RING CASE PIPE Illustrations accurate at time of going to print. Please be aware products and parts may change design without notice. For a High Resolution copy of this exploded parts diagram please visit www.parkerbrand.com...
- Page 27 HOOK HOUSING A BRACKET BACK BASE CYLINDER COVER BLOW PIPE Illustrations accurate at time of going to print. Please be aware products and parts may change design without notice. For a High Resolution copy of this exploded parts diagram please visit www.parkerbrand.com...
-
Page 28: Specification
THIS PAGE HAS INTENTIONALLY BEEN LEFT BLANK Fuel Mix Ratio (Petrol/2 Stroke Oil) 40:1 Level of Vibration of the Main Handle (m/s²) 1.46 Fuel Consumption at max power (kg/h) Dry Weight (kg) 1,253 *All measurements are approximate. If you require further information please contact ParkerBrand directly... -
Page 29: Guarantee
☑ Noise Emission Directive by equipment for use outdoors (2000/14/EC+2005/88/EC) Parker Products Ltd. Please go to www.parkerbrand.com in order to view the full warranty terms and exemptions from the warranty. Any damage caused by misuse, accident or any repair from an unauthorised agency is ☑... - Page 30 P B L B - 6 5 0 0 - B June 2022 Rev 1.1...