Advertisement
Solar Panel | 18V, 15W |
LED | 40 LED's, 3,000 lumens |
Charging Time | 9-10 hours |
Lighting Mode |
|
Lighting Time | More than 3 nights |
PIR Sensor | 5~8m, 120˚ |
IP Rating | Waterproof IP65 |
Install Height | 3~4 m |
Material | Aluminum alloy + steel glass |
Size | 808*227*164mm |
Warranty | 1 year |
Charging Temp | 0~45˚ |
Discharging Temp | -20˚~60˚ |
Storage Temp | 0~45˚ |
The internal battery is locked from factory for safety shipment, so users have to use supplied key pin to click the "on/off" socket and unlock the battery and lighting system.
Remark: Then use the supplied pin key to click the "ON/OFF" hole, the red indicator turns on means the lamp is unlocked and you can use the remote controller; if no red indicator, means the lamp is locked or no power.
If need to lock (turn off) the light, please use the pin to click the on/off socket again.
Please notice to install the light to the place without any shade and better face to sun light directly for better charging.
For street/roadway lighting, we suggest to install 10-12m distance between each light.
Use the supplied key pin to click the "ON/OFF" socket to unlock the battery
ON: Turn on the lamp, when you first time turn on the lamp, the initial default lighting mode is M1.
OFF: Turn off the lamp and save the last lighting mode.
Button 10%: To set brightness 10% for all the time till dawn, if you press any buttons of T1~T4, the lamp will turn on M1 lighting mode after timer end.
Button 30%: To set brightness 30% for all the time till dawn, if you press any buttons of T1~T4, the lamp will turn on M1 lighting mode after timer end.
Button 60%: To set brightness 60% for all the time till dawn, if you press any buttons of T1~T4, the lamp will turn on M1 lighting mode after timer end.
Button 100%: To set brightness 100% for all the time till dawn, if you press any buttons of T1~T4, the lamp will turn on M1 lighting mode after timer end.
T1: Set up 1 hour / 5 hours lighting time for the current brightness, after 1 hour it will auto turn back to M1 lighting mode.
(Long press any buttons of T2~T4 for 2S to cancel timer and the indicator will quick flash 3 times.)
T2: Set up 2/6 hours lighting time for the current brightness, after 1 hour it will auto turn back to M1 lighting mode.
(Long press any buttons of T2~T4 for 2S to cancel timer and the indicator will quick flash 3 times.)
T3: Set up 3/7 hours lighting time for the current brightness, after 1 hour it will auto turn back to M1 lighting mode.
(Long press any buttons of T2~T4 for 2S to cancel timer and the indicator will quick flash 3 times.)
T4: Set up 4/8 hours lighting time for the current brightness, after 1 hour it will auto turn back to M1 lighting mode.
(Long press any buttons of T2~T4 for 2S to cancel timer and the indicator will quick flash 3 times.)
If you want to set up time to 5-6-7-8 hours, please pull the backside button to "ON" position.
Button M1: 10% brightness + PIR (100% brightness for 30S delay and 10% dim light if no new motion happen)
Button M2: 30% brightness + PIR (100% brightness for 30S delay and 30% dim light if no new motion happen)
Indicator: Turn red when you press buttons
All the buttons have memory function: Means when you set up the lighting mode and next days will follow the same lighting mode till you do others setup.
Replace the inside battery work as the picture when the battery span life is in the end.
Courtyard / Garden park / Street / Roadway / Pathway / Parking Lot / Private Road / Sidewalk / Public square / Plaza / Campus / Airfield / Farm & ranch / Perimeter security / Wildlife area / Remote area / Military base
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download WAGAN Tech 8580 - All-in-One Solar Courtyard/Street LED Light Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the 8580 that isn't answered in the manual? Leave your question here.