XU1 XGTK-0185 Operating Instructions Manual

XU1 XGTK-0185 Operating Instructions Manual

Cordless grass trimmer kit 18v

Advertisement

Quick Links

XU1 Power tools
Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, Victoria, Australia 3175
Telephone: 1800 069 486 (Aus), 0508 069 486 (NZ)
XGTK-0185 1121

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XGTK-0185 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for XU1 XGTK-0185

  • Page 1 XU1 Power tools Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, Victoria, Australia 3175 Telephone: 1800 069 486 (Aus), 0508 069 486 (NZ) XGTK-0185 1121...
  • Page 2: Safety Instructions

    SAFETY GENERAL POWER TOOL e) Do not overreach. Keep proper footing and balance at all times. This enables better control of SAFETY WARNINGS INSTRUCTIONS the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing WARNING! Read all safety DESCRIPTION OF SYMBOLS or jewellery.
  • Page 3: Grass Trimmer Safety Warnings

    5. Do not use the supplied battery charger to charge other • When not in use, store the grass trimmer out of the reach of children. cordless tools. Only charge XU1 rechargeable batteries 2. For optimum battery performance avoid low discharge •...
  • Page 4 1. Tree/flower guard 2. Motor housing 3. Telescopic shaft 4. Shaft adjustment collar 5. Adjustable handle 6. On/off trigger 7. Lock-off switch 8. Soft grip handle 9. Blade 10. Spindle plate 11. Safety guard 12. Battery seating 13. Battery release button 14.
  • Page 5: Specifications

    SPECIFICATIONS OPERATION Allow at least 3 hours of charge time before initial use of the battery. Charge the battery pack only with the charger provided. The battery should be charged in a Voltage: 18V cool dry place. It will take 2 to 3 charging/discharging Adjustable Handle No Load Speed: 8,500/min cycles before the battery achieves maximum run time...
  • Page 6: Troubleshooting

    TROUBLESHOOTING Note: If the motor starts to slow down, reduce the cutting load. • If then grass trimmer is not cutting correctly, the blade Problem Cause Remedy will need to be replaced, refer to the assembly section Trimmer is not starting Possible clogging Clean the cutter head of of this manual.

Table of Contents