Subscribe to Our Youtube Channel
Related Manuals for XU1 XHT-450
Summary of Contents for XU1 XHT-450
- Page 1 XU1 Power tools 1–23 Letcon Drive, Bangholme, Victoria, Australia 3175 Telephone: 1800 069 486 Website: www.xuone.com.au XHT-450 0516...
-
Page 2: Safety Instructions
The electric motor has been designed for 230V and Wear hearing protection 240V only. Always check that the power supply corresponds to the voltage on the rating plate. Note: The supply of 230V and 240V on XU1 tools are interchangeable for Australia and New Wear eye protection Zealand. -
Page 3: General Power Tool Safety Warnings
Hedge Trimmer Safety Warnings d) Remove any adjusting key or wrench before General Power Tool Safety turning the power tool on. A wrench or a key left • Keep all parts of the body away from the attached to a rotating part of the power tool may Warnings result in personal injury. - Page 4 1. Dual Action Cutting Blades 6. Rear Handle 2. Blade Support Rail 7. Extension Cord Retainer 3. Safety Guard 8. On/Off Trigger 4. Front Handle 9. Safety Guard Screws x 4 5. Safety Switch...
-
Page 5: Specifications
Use of an extension lead not suitable for the power input of the tool or which is Your XU1 Hedge Trimmer has been designed for Top cutting damaged or defective may result in a risk of fire and trimming and shaping shrubs and hedges. -
Page 6: Warranty
• No lubrication is necessary as the motor is equipped with lifetime-lubricated bearings. Note: XU1 will not be responsible for any damage or injuries caused by the repair of the tool by an unauthorised person or by mishandling of the tool.
Need help?
Do you have a question about the XHT-450 and is the answer not in the manual?
Questions and answers