Advertisement
Control Switch Operation Instruction
1
Memory Standing
Position
1. Save
Lift up/down the table to the desired height, and press
will show
- while the - keeps flashing, then press
the height memory is done.
2. System Reset
When any failure occurs when lifting up or down the table, please press and hold
on
until the top stops falling, and keep holding on
buzzer makes a beep sound which means the system reset is successful and the
table will resume normal working.
Failure Codes
Failure Code
E5
E8
E11/E21/E40
HOT
If any other code displays, please contact our customer service team. Thank you!
2
Memory Sitting
Position
Code Illustration
Display of a stop out of collision
The top inclines when working
Circuit is broken
The system is overheating
American Manufacturing
Protected by US Patent No. 10,485,336 & 10,849,424
Assembly Instructions
Display
Save
Up
/
for another 5 secs until the
Troubleshooting
Release the button and restart the system
System Reset
Check the circuit
Wait 18 mins and restart the system
Lifetime Warranty
Down
button, the Display
button, after which,
1 (800) 465-1660
support@versadesk.com
Advertisement
