Controls And Functions - Uniden Bearcat BC 55XLT Operating Instructions Manual

CONTROLS AND FUNCTIONS
TOP PANEL FEATURES (Figure 1)
1. On/Off Volume Control: Top mounted rotary control turns the receiver
on and off, and adjusts the volume.
2. Squelch: Top mounted rotary control is used to silence background noise.
The radio should be squelched (silent) when no signal is present. Turn the
control clockwise to receive more distant (weaker) signals.
3. Antenna Connector: BNC connector for custom flexible antenna.
4. Earphone Jack: Connect earphone for private listening. When earphone
is connected, main speaker is disconnected.
Channel Scan = Manual
or 5| (OG O|
Keypad Lockout Review
Co ca ca
Off On
EAR PH SQUELCH VOLUME
BC 55XLT
ooo
==
=
Figure 1 — |)
unIdeN seorcar
Figure 2
FRONT PANEL FEATURES (Figure 2)
1. Liquid Crystal Display: The LCD shows channel number, frequency (by
displaying each digit consecutively), LOCK OUT when certain channels are
locked out of the scanning process, and E to indicate an erroneous entry.
2. Keypad Lock: Locks the keypad to avoid accidental entry or misprogram-
ming.
SCAN Press to start scanning all active channels.
Stops the scan function, steps scanner through channels in se-
quence, and allows direct channel access.
scanning only.
Press to see the frequency programmed in each channel. All dig-
REVIEW | .
its of the frequency will be shown in sequence.
Numeric keys (0} through (9) and decimal point C) are used to
program frequencies. E enters frequencies to any of the ten chan-
nels.
LOCKOUT Locks out the reception of signals on any selected channels while
Pat oe