Snapper 3201 Series Safety Instructions And Operator's Manual

Safety Instructions &
Operator's Manual
for
3201 SERIES SINGLE STAGE
SNOW THROWERS
THANK YOU for buying a SNAPPER product! Your SNAPPER Snow
Thrower was designed and built to provide long and satisfactory service.
Keep in mind that it, like any other mechanical device, can be potentially
dangerous if used improperly and that no accident prevention program can
be successful without the wholehearted co-operation of the person respon¬
sible for the operation of the equipment. Study this Operator's Manual
carefully to learn about operation of all controls and pay particular atten¬
tion to the Important Safety Precautions on page 2.Following these instruc¬
tions will help you continue to enjoy the trouble-free operation expected of
a SNAPPER product.
INTRODUCTION
The Snapper model 3201 single stage Snow thrower is powered by a 3HP
two cycle engine which requires an exact mixture of oil and gasoline to pro¬
vide internal lubrication of the engine. Since several different makes of
engines are used to power the 3201, refer to the engine manual which ac¬
companies your unit for the specific fuel ratio and other important details.
Save these manuals and review at the start of each new season. Pay par¬
ticular attention to the Important Safety Instructions and to the warning
decals on the unit.
The 3201 will clear a path approximately twenty inches wide and will throw
the snow from 3 to 18 feet away depending on the setting of the discharge
deflector and conditions of the snow. The light weight of the unit allows
easy lifting for sweeping steps and porches. The quart capacity tank holds
sufficient fuel for 1 to 1-Vi hours operation.depending upon load condi¬
tions.
SNAPPER POWER EQUIPMENT
McDonough,GA* 30253
A
FUQUA
INOUNTmiB
Company