Subscribe to Our Youtube Channel
Related Manuals for adstec IRF3000 Series
Summary of Contents for adstec IRF3000 Series
- Page 1 Translation of the original instruction manual Version 1.4 Updated 2024-02-20 Instruction manual Industrial router & firewall IRF3000 series...
-
Page 2: Table Of Contents
IRF3000 series Instruction manual v1.4 Table of Contents Notes ............................4 General remark Manufacturer Limitation of liability Relevant device documentation Safety instructions ........................6 Structure of safety instructions Graduation of risk level Explanation of used symbols Symbols Data, figures and modifications... - Page 3 IRF3000 series Instruction manual v1.4 Electrical interfaces ........................ 23 Power supply 6.1.1 Requirements on the power supply Modbus RTU (RS-485) Digital I/O #2 Digital I/O #3…5 Smart card reader, SIM card and microSD card Commissioning ........................26 Connecting the device to a laptop or PC...
-
Page 4: Notes
IRF3000 series Instruction manual v1.4 1 Notes 1.1 General remark This instruction manual is intended to ensure safe and efficient handling of the industrial router and firewall of type IRF3xxx, referred to in the following as "device". The instruction manual must be read carefully by personnel before commencing any type of work. -
Page 5: Relevant Device Documentation
IRF3000 series Instruction manual v1.4 1.4 Relevant device documentation The following documents are decisive to device setup and operation: • This instruction manual contains information for installation, commissioning and operation of the device along with technical data of the device hardware. -
Page 6: Safety Instructions
IRF3000 series Instruction manual v1.4 2 Safety instructions 2.1 Structure of safety instructions The signal word classifies the hazard. Reference to the type/consequences and source of the hazard is made underneath the signal word. Information on how to avoid the hazard is indicated by an arrow (). -
Page 7: Symbols
IRF3000 series Instruction manual v1.4 Recommendation for use: The symbol "Recommendation for use" indicates terms and/or conditions that strictly need to be observed to ensure optimised and/or zero-defect operation. Tips and suggestions for the efficient use of the device and software optimisation are also provided. -
Page 8: Trademarks
IRF3000 series Instruction manual v1.4 2.6 Trademarks It is noted that any software and/or hardware trademarks and any company brand names mentioned in this documentation are all subject to the general trademark protection rights. Big-LinX and X-Remote are registered trademarks of ADS-TEC. -
Page 9: Conformity
IRF3000 series Instruction manual v1.4 2.8 Conformity The manufacturer hereby declares that this device has been marked with the CE mark in accordance with the basic requirements and other relevant conditions of the following European Directives: 2011/65/EU RoHs Directive •... -
Page 10: Operating And Safety Instructions
IRF3000 series Instruction manual v1.4 3 Operating and safety instructions The device operates under electrical voltage and contains highly sensitive components. Intervention by the user is required only for connecting the power supply lines. Should any further modifications be required, it is necessary to consult either with the manufacturer directly or with service personnel authorised by the manufacturer. -
Page 11: Safety Instructions
IRF3000 series Instruction manual v1.4 3.1 Safety instructions ATTENTION To prevent damage to the device, all cable lines (power supply, interface cables) must only be connected while the device is switched off. ATTENTION All installation work performed on the device must be performed only under safe, secure and de-energised conditions. -
Page 12: Warranty / Repairs
IRF3000 series Instruction manual v1.4 3.4 Warranty / repairs During the device warranty period, any repairs must only be performed by the manufacturer or by service personnel that has been authorised by the manufacturer. 3.5 Intended use The device was developed especially for IT security in machines and plants and for secure remote maintenance via the Internet. -
Page 13: Safety Instructions On Mobile Radio
IRF3000 series Instruction manual v1.4 3.8 Safety instructions on mobile radio WARNING Radio interference may have unforeseeable effects in certain environments! The wireless card must NOT be operated in the following environments: • – in the vicinity of medical and life-saving equipment, –... -
Page 14: Calculation Example For The Transmission Power (Eirp)
IRF3000 series Instruction manual v1.4 WARNING Radio interference and possible damage to health due to exceeding the permitted transmission power! The maximum permitted field strength can be exceeded when using directional antennas with a high level of antenna gain. Comply with the maximum permitted signal strength (EIRP) as per the •... -
Page 15: Notes On Using The Device According To Ul Approval
IRF3000 series Instruction manual v1.4 3.10 Notes on using the device according to UL approval For devices with a UL marking on the type plate, the following applies: • Indoor use only! The communication cables may only be installed inside a building. -
Page 16: Introduction
IRF3000 series Instruction manual v1.4 4 Introduction The industrial firewall forms the link between the IT world and the automation system and meets the requirements of IT security as well as of the maintenance personnel in the production facility. It allows the network as well as access to this network to be monitored. -
Page 17: Event Log
IRF3000 series Instruction manual v1.4 4.2 Event log If the firewall is not disconnected from the power supply, an event log saves all events. The event log can be read out both locally and via a central syslog server. 4.3 Mobile radio modem (optional) The integrated LTE modem enables mobile radio connections. -
Page 18: Environmental Conditions
IRF3000 series Instruction manual v1.4 4.5 Environmental conditions The device can be put into operation and used under the following conditions. Failure to observe any one of these conditions will invalidate the warranty of the device. ADS-TEC cannot be held liable for any damages arising from improper use and handling. -
Page 19: Installation
IRF3000 series Instruction manual v1.4 5 Installation No other types of installation are permitted than those in subchapters 5.3 and 5.4 5.1 External device dimensions IRF34x1 © ads-tec Industrial IT GmbH • Heinrich-Hertz-Str.1 • 72622 Nürtingen • Germany... -
Page 20: External Device Dimensions Irf38X1
IRF3000 series Instruction manual v1.4 5.2 External device dimensions IRF38x1 © ads-tec Industrial IT GmbH • Heinrich-Hertz-Str.1 • 72622 Nürtingen • Germany... -
Page 21: Top-Hat Rail Mounting
IRF3000 series Instruction manual v1.4 5.3 Top-hat rail mounting 1. Position the IRF on the top-hat rail from below at an angle (1). 2. Pull the top-hat rail locking mechanism (2) upwards using a screwdriver, push the device onto the upper side of the top-hat rail and remove the screwdriver. -
Page 22: Optional: Attaching Antennas
IRF3000 series Instruction manual v1.4 5.5 Optional: Attaching antennas • Screw the mobile communications antennas to the antenna connections (WWAN AUX/MAIN) directly or via an SMA extension cable. IRF38 only: Screw the SMA cable of the GPS antenna to the GNSS connection. -
Page 23: Electrical Interfaces
IRF3000 series Instruction manual v1.4 6 Electrical interfaces 6.1 Power supply Signal Digital input #1: +24 VDC ± 20 % (Reference potential is 0V of the device) Functional earth (FE, required for EMC) Reference potential 0 V Supply voltage +24 VDC ± 20 % Schematic diagram for the wiring of digital input no. -
Page 24: Modbus Rtu (Rs-485)
IRF3000 series Instruction manual v1.4 6.2 Modbus RTU (RS-485) The fieldbus node is electrically isolated from the power supply of the IRF. Its electrical bus load is 1/8 unit load (impedance 96 kΩ). Signal Reference potential (common) for the data signals... -
Page 25: Smart Card Reader, Sim Card And Microsd Card
IRF3000 series Instruction manual v1.4 6.5 Smart card reader, SIM card and microSD card SIM cards and smart cards (SC) in the ID-000 format as defined in ISO 7816 (25x15 mm) can be used. The SIM card for mobile communications must be inserted into the bottom slot (SIM1). -
Page 26: Commissioning
IRF3000 series Instruction manual v1.4 7 Commissioning 7.1 Connecting the device to a laptop or PC Connect the device with an appropriate power source, see chapter 6.1 Power supply. Connect connection ETH2 on the device via a patch cable with a PC or laptop. -
Page 27: Calling Up The Device Web Interface
IRF3000 series Instruction manual v1.4 7.3 Calling up the device web interface Recommendation for use: The web interface of the device was optimised for the Mozilla Firefox browser. There may be functional limitations if a different browser is used. Start up your web browser. In the browser’s address bar, enter the following IP address and then confirm with Enter http://192.168.0.254... -
Page 28: Front Leds
IRF3000 series Instruction manual v1.4 7.4 Front LEDs Signal Action PWR (Power) The device is not supplied with voltage. Voltage was switched on, device booting. LED flashes slowly (1 Hz). Firmware is being updated. LED flashes rapidly (5 Hz). The device is ready for operation. -
Page 29: Operating-Mode Related Led Status Displays
IRF3000 series Instruction manual v1.4 7.5 Operating-mode related LED status displays 7.5.1 Boot-up The boot-up process begins as soon as the device is supplied with power. The PWR LED flashes slowly. 7.5.2 Resetting to default settings The Factory Default button is used to reset the firewall back to the default factory settings at any time. -
Page 30: Technical Data
IRF3000 series Instruction manual v1.4 8 Technical data IRF34x1 / IRF38x1 Operating system Embedded Linux Hardware ARM, 64 bit, 4 x 1.6 GHz; 4 GB RAM; 8 GB Flash Interfaces Ethernet: 4 x 1 Gbit/s (IRF34) / 8 x 1 Gbit/s (IRF38) -
Page 31: Service & Support
IRF3000 series Instruction manual v1.4 9 Service & support ADS-TEC and its partner companies offer you comprehensive maintenance and support services, ensuring quick and competent support should you have any questions or concerns with regard to ADS-TEC products and equipment.
Need help?
Do you have a question about the IRF3000 Series and is the answer not in the manual?
Questions and answers