Model/Modelo/Modèle
51900
Series/Series/Seria
• ADA COMPLIANT ADJUSTABLE MOUNT, HAND SHOWER AND HOSE.
• ADA COMPLIANT GRAB BAR WHEN INSTALLED PER THE ACCESSIBILITY
GUIDELINES OF THE ACT.
• ADA DE CUMPLIMIENTO CON MONTAJE AJUSTABLE, DUCHA DE MANO
Y MANGUERA.
• ADA DE CUMPLIMIENTO CON LA BARRA DE AGARRE AL INSTALARSE
SEGÚN LAS PAUTAS DE ACCESIBILIDAD DE LA ACT.
• MONTAGE RÉGLABLE, DOUCHETTE À MAIN ET TUYAU CONFORME ADA.
• BARRE D'APPUI CONFORME ADA LORSQU'ELLE EST INSTALLÉE PAR LES DIREC
TIVES SUR L'ACCESSIBILITÉ DE L'OPÉRATION.
Parts and Hardware included:
1 – Slide Bar / Grab Bar
1 – Adjustable Hand Shower Mount
1 – Hand Shower with Rub Clean and Dual Check Valves
1 – 60"~82" Stretchable Hose
1 – Set of Mounting Hardware
Six (6) #10 x 2-1/2" Wood Screws
Piezas y hardware incluidos:
1 – Barra Deslizante / Barra de Apoyo
1 – Instalación de la Ducha a Mano Adjustable
1 – Ducha a Mano con Limpio de Frotamiento y Válvula de Retención Doble
1 – 60"~82" Manguera Estirable
1 – Juego de Herramientas de Instalación
Seis (6) #10 x 2-1/2" Tornillos de Madera
Pièces et matériel inclus:
1 – Barre Coulissante / Barre d'Appui
1 – Montage de Pommeau de Douche Ajustable
1 – Pommeau de Douche avec Tampon et Clapet Anti-retour
1 – Tuyau Extensible 60"~82"
1 – Set de Matériel de Montage
Six (6) Vis à Bois #10 x 2-1/2"
www.deltafaucet.com
87860
You may need / Usted puede necesitar /
Articles dont vous pouvez avoir besoin:
1
SHOWER SLIDE BAR / GRAB BAR
WITH HAND HELD SHOWER
BARRA PARA LA REGADERA
DESLIZABLE CON REGADERA DE
MANO
COULISSE DE DOUCHE AVEC
DOUCHE À MAIN
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
87860
11/01/2023
Rev. E
Need help?
Do you have a question about the 51900 Series and is the answer not in the manual?
Questions and answers
How do remove covers on concealed mount grab bar and how do I tighten the slide when it slides down the bar on delta 51900 slide bar?
To remove the covers on the concealed mount grab bar of the Delta 51900 slide bar, take off the cover plates from the mounting holes before installation. To tighten the slide, securely fasten all mounting wood screws with a screwdriver, ensuring they are properly tightened into the wall and wall stud. If using a concealed mount grab bar, move the cover plates over the mounting holes and firmly press them against the wall.
This answer is automatically generated