Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
2021 by Harbor Freight Tools
©
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
. All rights reserved.
®
2 JAW MASTER
INTERCHANGEABLE
PULLER SET
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
23g
58118
Advertisement
Table of Contents
Related Manuals for ICON 58118
Summary of Contents for ICON 58118
- Page 1 Keep this manual and the receipt in a safe and dry place for future reference. 2 JAW MASTER INTERCHANGEABLE PULLER SET 58118 Visit our website at: http://www.harborfreight.com Email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged.
- Page 2 4. Use only according to vehicle service instructions. If unreadable or missing, contact Harbor Freight Tools for a replacement. 5. Inspect before every use; do not use if parts are loose or damaged. Page 2 For technical questions, please call 1-888-866-5797. Item 58118...
- Page 3 Pressure Screw. Jaw Pin 3. Insert the Clamp Bolt through the Jaw opening and hand tighten Washer and Nut. 4. Attach the other Jaw, Washer and Nut. Pressure Washer Clamp Bolt Item 58118 For technical questions, please call 1-888-866-5797. Page 3...
- Page 4 5. If more leverage is needed, place Centering Disc onto center of object and center the Pressure Tip against it. Centering Disc Jaws Pointing In Jaws Pointing Out Page 4 For technical questions, please call 1-888-866-5797. Item 58118...
- Page 5 Carry Case. • loose hardware • misalignment or binding of moving parts • cracked or broken parts • any other condition that may affect its safe operation. Item 58118 For technical questions, please call 1-888-866-5797. Page 5...
- Page 6 Centering Disc, 41.3mm Pressure Tip, 22.2mm x 7/8" L Centering Disc, 38mm Pressure Tip, 16mm x 5/8" L Centering Disc, 34mm Carry Case (not shown) Clamp Bolt, 7/16" - 20UNF - 154.6mm Page 6 For technical questions, please call 1-888-866-5797. Item 58118...
- Page 7 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175432568 when ordering parts. Item 58118 For technical questions, please call 1-888-866-5797. Page 7...
- Page 8 ICON™ product, which shall be your sole and exclusive remedy. To obtain warranty service, ICON™ products must be returned with proof of purchase to a Harbor Freight Tools retail store or returned by mail after contacting Harbor Freight Tools Product Support at 1-888-866-5797 and receiving a return authorization.
Need help?
Do you have a question about the 58118 and is the answer not in the manual?
Questions and answers