Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the back
of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep
this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
21i
Advertisement
Table of Contents
Related Manuals for ICON 58003
Summary of Contents for ICON 58003
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Specifications
TO PREVENT SERIOUS INJURY FROM EXPLOSION: Carefully follow service instructions to disable airbag before working near steering wheel or steering column. For technical questions, please call 1-888-866-5797. Page 2 Item 58003... - Page 3 Turn Pressure Screw with T-bar clockwise until Plug Pin is properly seated and makes contact with center of application mount. Continue turning Pressure Large Screw with T-bar clockwise until Pin (11) application is removed. For technical questions, please call 1-888-866-5797. Item 58003 Page 3...
- Page 4 Plug Pin is properly seated and makes contact with center of application mount. Large Pin (11) Continue turning Pressure Screw with T-bar clockwise until application is removed. Two Jaw Yoke (7) For technical questions, please call 1-888-866-5797. Page 4 Item 58003...
-
Page 5: Maintenance
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. For technical questions, please call 1-888-866-5797. Item 58003 Page 5... -
Page 6: Parts List And Diagram
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175430656 when ordering parts. For technical questions, please call 1-888-866-5797. Page 6 Item 58003... - Page 7 Diagram For technical questions, please call 1-888-866-5797. Item 58003 Page 7...
-
Page 8: Limited Lifetime Warranty
ICON™ product, which shall be your sole and exclusive remedy. To obtain warranty service, ICON™ products must be returned with proof of purchase to a Harbor Freight Tools retail store or returned by mail after contacting Harbor Freight Tools Product Support at 1-888-866-5797 and receiving a return authorization.
Need help?
Do you have a question about the 58003 and is the answer not in the manual?
Questions and answers