Usb Mode - Ximeta NetDisk Mini MNC10-40 User Manual

®
NetDisk User Manual

2.2 USB Mode

NetDisk and NetDisk Office
1. If your NetDisk has dip switches on the rear panel, flip both dip switches up.
2. Connect the included USB cable from USB port on NetDisk to your computer's
USB port.
3. Make sure the power connector is connected firmly to the NetDisk and connect the
power adaptor to a power source.
4. If your NetDisk has an On/Off switch, slide the On/Off Switch to ON position.
NetDisk Mini
Without external power
1. Connect the included USB cable from the USB port on NetDisk Mini to your
computer's USB port(s). To ensure continuous power flow please connect
both connectors with your host computer.
2. Slide the On/Off switch to OFF position.
With external power
1. Connect the included USB cable from the USB port on NetDisk Mini to your
computer's USB port(s). Only one cable is required to be connected with your
host computer when using an external power source. It does not matter which
connector you choose to connect.
2.
Slide the On/Off switch to ON position.
XIMETA, Inc
Network Direct Attached Storage / NDAS
7
®
www.XIMETA.com