Advertisement
Quick Links
Copyright Statement
© Datapath Ltd., England, 2015
Datapath Limited claims copyright on this
documentation. No part of this documentation may be
reproduced, released, disclosed, stored in any electronic
format, or used in whole or in part for any purpose other
than stated herein without the express permission of
Datapath Limited.
Whilst every effort is made to ensure that the
information contained in this documentation is correct,
Datapath Limited make no representations or warranties
with respect to the contents thereof, and do not accept
liability for any errors or omissions.
Datapath reserves the right to change specification
without prior notice and cannot assume responsibility for
the use made of the information supplied.
Datapath Limited acknowledges all registered
trademarks used within this documentation.
Product
VisionHD2-SQX Quick Start Guide
Classification
Released
UK Headquarters
Datapath Ltd.,
Bemrose House, Bemrose Park,
Wayzgoose Drive,
Derby,
DE21 6XQ,
United Kingdom
Tel: +44 (0) 1332 294441
Fax: +44 (0) 1332 290667
US Office
Datapath North America
2550 Blvd of the Generals
Suite 30
Norristown, PA 19403
USA
Tel: +1 484 679 1553
Email: sales@datapath.co.uk
Web: www.datapath.co.uk
VisionHD2-SQX
Triple Channel Capture & Encoding
Advertisement
Related Manuals for Datapath VisionHD2-SQX
Summary of Contents for Datapath VisionHD2-SQX
- Page 1 Whilst every effort is made to ensure that the US Office information contained in this documentation is correct, Datapath North America Datapath Limited make no representations or warranties 2550 Blvd of the Generals with respect to the contents thereof, and do not accept Suite 30 liability for any errors or omissions.
- Page 2 Remove the VisionHD2-SQX card from its packaging and secure it firmly into the empty PCIe slot. Screw the VisionHD2-SQX bracket to the back panel of the PC and replace the cover. Connect the cable(s) distributing the RGB or DVI signals to the connectors on the VisionHD2-SQX card.