en Troubleshooting
Fault
Remnants of food on
tableware.
Removable streaks
are present on
glasses, glassware
with a metallic appear-
ance and cutlery.
44
Cause and troubleshooting
▶
Arrange tableware so that it does not obstruct
spray arm rotation.
Spray arm nozzles are blocked.
▶
Clean the Spray arms → Page 40.
Filters are soiled.
▶
Clean the filters.
→ "Cleaning filters", Page 39
Filters are inserted incorrectly and/or not engaged.
Insert the filters properly.
1.
→ "Filter system", Page 39
Engage the filters.
2.
Washing programme selected too weak.
Select a more intensive washing programme.
▶
→ "Programmes", Page 17
Tableware has been precleaned too intensely. The
sensors chose a weaker programme. Stubborn soiling
cannot be entirely removed.
▶
Only remove large remnants of food and do not
prerinse tableware.
Tall narrow receptacles in corner areas are not rinsed
adequately.
▶
Do not position tall narrow receptacles at too great
an angle or in corner areas.
Top baskets on right and left are not set to same
height.
▶
Set the upper basket on the left and right to the
same height.
→ "Top basket", Page 20
Amount of rinse aid to be dispensed is set too high.
▶
Set the rinse aid system to a lower setting.
→ "Setting the amount of rinse aid", Page 25
No rinse aid has been added.
▶
Add rinse aid.
→ "Adding rinse aid", Page 25