Page 2
Before attempting to work with your loupes, we recommend that you take the time to carefully read the instructions in this user manual. Although your new loupes have been customized and fully tested by our factory technicians, before you begin using them, they may need to be initially adjusted to sit well on your face.
Page 3
6. Do not use machinery sterilization methods to clean your loupes. Prescription change In case of a change in your prescription, it is possible to send your loupes to our factory for refurbishment. Please arrange this via your local distributor.
Page 4
Adjust your loupes: For optimal positioning and view, the frame should sit on the bridge of your nose and closer to your eyes. Your loupes have been crafted to fit your exact pupillary distance therefore, if any additional adjustments are needed, please...
Page 5
INSTRUCTIONS FOR USE Lanyard adjustment & installation: It is highly recommended you use the included lanyard for your loupes to evenly distribute their weight and increase your comfort throughout the workday. [Fig. 05] 1. Insert the lanyard tips into the temple-tips holes and snap the buttons shut.
Page 6
If cleaners leave residue on the lenses, use a soft, lint- free cloth to remove it. To Disinfect Your Loupes: 2. Use OPTIM 1 Wipes, Caviwipes or Admetec cloth with any alcohol up to 70%. 3. Wipe all exposed plastic surfaces, including frame, temples and tubes.
Page 7
Warranty Period. During the Warranty Period, if any defect is noticed: 1. Admetec will be responsible for repairing the loupes at no extra charge. The repair procedure might use either new or refurbished part(s), based on the availability of the material.
Page 8
Do you need customer service? Please contact your local distributor. Obelis S.A Admetec Solutions LTD. Bd Général Wahis, 53, Yokhanan HaSandlar St 18 Brussels, B-1030 Belgium. Haifa, Israel. IM4000004_Rev.C...
Need help?
Do you have a question about the Loupes and is the answer not in the manual?
Questions and answers