Advertisement
EN
OPTIONS AND FUNCTIONS
DRAIN OUT - To stop and cancel the active cycle, the Drain Out function can be used. A long press of START/PAUSE button, will activate the DRAIN
OUT function. The active program will be stopped and the water in the dishwasher will be drained out.
LOADING THE RACKS
UPPER RACK
Load delicate and light
dishes: glasses, cups, sa-
ucers, low salad bowls.
(loading example for
the upper rack)
CLEANING AND MAINTENANCE
CLEANING THE FILTER ASSEMBLY
1
A
In case you find foreign objects (such as broken glass, porcelain, bones, fruit seeds etc.)
please remove them carefully.
NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).
TROUBLESHOOTING
PROBLEMS
POSSIBLE CAUSES
No water in the water supply or the tap is closed. Make sure there is water in the water supply or the tap running.
The dishwasher does
not fill the water.
The inlet hose is bent.
All LEDs are
The sieve in the water inlet hose is clogged; it
blinking rapidly.
is necessary to clean it.
Drain hose positioned too low or siphoning
Dishwasher finishes
into home sewage system.
the cycle prematurely.
Air in water supply.
Policies, standard documentation, ordering of spare parts and additional product information can be found by:
• Using QR code on your product.
• Visiting our website docs.indesit.eu and parts-selfservice.whirlpool.com
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-
sales Service, please state the codes provided on your product's identification plate.
The model information can be retrieved using the QR-Code reported in the energy label. The label also includes the model
identifier that can be used to consult the portal of the registry at https://eprel.ec.europa.eu.
2
FOLDABLE
FLAPS WITH
ADJUSTABLE
POSITION
2
3
B
C
A
Please scan the QR code on your product in order to have more detailed information.
LOWER RACK
For pots, lids, plates,
salad bowls, cutlery
etc. Large plates and
lids should ideally be
placed at the sides to
avoid
interferences
with the spray arm.
(loading example for
the lower rack)
More information in the Daily Reference Guide on website.
CLEANING THE SPRAY ARMS
4
To remove the upper spray arm,
turn the plastic locking ring in
a clockwise direction.
Please scan the QR code on your product in order to have more detailed information.
SOLUTIONS
Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dish-
washer and reboot.
After having carried out the verification and cleaning, turn off and turn on the
dishwasher and restart a new program.
Check if end of drain hose is placed at correct height (see INSTALLATION).
Check for siphoning into home sewage system, install air admittance valve if
necessary.
Check water supply for leaks or other issues letting air inside.
Quick Guide
CAPACITY: 9 standard place-settings
CUTLERY BASKET
The basket is equipped with
top grilles for improved cut-
lery arrangement. The cut-
lery basket should be posi-
tioned only at the front of
the lower rack.
Knives and other utensils
with sharp edges must be
placed in the cutlery basket with the points
facing downwards or they must be posi-
tioned horizontally in the tip-up compart-
ments on the upper rack.
The lower spray arm may
be removed by pulling it
upwards.
:
400011687081B
09/2023 ks - Xerox Fabriano
IEC 436
Advertisement
