Pioneer PL-X430 Operating Instructions Manual page 7

NAMES AND USE OF PARTS
EP Adaptor
When playing a record with a doughnut hole,
place this over the platter spindle.
Platter Spindle i poo Cartridge (PC-295T)
SN
—l ©
i
a
Z
Platter Mat ye
. SS
Platter
Sea,
a
Cel Felfei
ARM ELEVATION Switch
@ Use to perform manual play.
@ Use to temporarily stop playing.
@ Use to change tracks in the middle of play.
When changed, the tone arm moves up or
down.
When [UP] lights — The tone arm rises. (The
stylus is lifted off the record.)
When [DOWN] lights — The tone arm de-
scends. (The stylus is lowered onto the record.)
STOP Switch
Press to stop play.
PLAY Switch
@ Press to begin play.
@ When pressed during FULL AUTO play, the
turntable returns to the first track and begins
playing from there. (Re-start function)
POWER Switch
Press
to turn power
to the
unit ON and
STAND-BY.
SIZE Selector Switch
Set this switch to the size of record which you
intend to play.
[30] (When pressed in) — To play 30 cm LPs
[17] (When in the out position) — To play 17 cm
EPs
SPEED Selector Switch
Set this switch to the rotation speed of the
record which you intend to play.
[45] (When in the out position) — Platter rotates
at 45 rpm.
[33] (When pressed in) — Platter rotates at 33
rpm.
REPEAT Switch
Press to perform repeat playback. When the
switch is pressed in, the REPEAT indicator lights.
Indicators
[UP]
Lit: Tone arm is in up position.
Not lit: Tone arm is moving.
[REPEAT] — Lights during REPEAT play.
[DOWN] —_ Tone arm is down.
LOCATE Switch (FORWARD/REVERSE)
Use during manual play and when you want to
change tracks. When pressed, the tone arm
moves left or right.
[FORWARD] — Tone arm moves to the left.
[REVERSE] — Tone arm moves to the right.
7
<PRE1033>