Download Print this page
LEGRAND 0 648 96A Manual

LEGRAND 0 648 96A Manual

Connected roller shutter switch

Advertisement

Quick Links

Connected roller shutter switch
0 648 96A - 0 677 26A - 0 677 76A - 0 777 06LA - 6 000 86A - 6 001 86A
This pack is a connected accessory which requires you to buy and install the Céliane
with Netatmo connected starter pack first.
Pack contents
Connected roller shutter
switch
Characteristics
+ 45°C
+ 5°C
110-240 VAC
1 x 2,5 mm2
50/60 Hz
2 x 1,5 mm2
240 VAC max.
110 VAC max.
Site protection
Roller shutter engine
1 x 500 VA
1 x 270 VA
Before you start
If you plan to install roller shutter switches, read the following precautions:
To control a roller shutter switch with two or more wireless switches,
only use the products:
x 1
Connected roller shutter switch
Ensure you have roller shutters wireless switches for each additional control point.
To create a centralised control:
- Use one or more connected roller shutter switches.
- Use a roller shutters wireless switch.
Mandatory safety precautions
OFF
Switch off the power at the main circuit breaker
AND
x 1
or several
Roller shutters wireless switch
(not included in this pack)
Make sure that the power
is
off before continuing with
the installation.
2

Advertisement

loading

Summary of Contents for LEGRAND 0 648 96A

  • Page 1 Connected roller shutter switch Before you start 0 648 96A - 0 677 26A - 0 677 76A - 0 777 06LA - 6 000 86A - 6 001 86A If you plan to install roller shutter switches, read the following precautions: To control a roller shutter switch with two or more wireless switches, This pack is a connected accessory which requires you to buy and install the Céliane...
  • Page 2 Install the connected switch for roller shutter Installation of the connected shutter switch into the Zigbee radio network Turn the power back on at the main circuit breaker. Remove the existing switch The indicator lights on the connected shutter Wire the connected roller shutter switch switch that you have wired turns red.
  • Page 3 Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights to replacement and guarantees.

This manual is also suitable for:

0 677 26a0 677 76a0 777 06la6 000 86a6 001 86a