Advertisement
READ
INSTRUCTIONS
—
All the
safety
and
operating instructions should be read before the
appliance is operated.
RETAIN
INSTRUCTIONS
— The operating instruc-
tions should be retained for future reference.
HEED WARNING
—
All warnings on the appliance
and in the operating instructions should be adhered
to,
FOLLOW
INSTRUCTIONS
— All operating and use
instructions should be followed.
WATER
AND
MOISTURE
—
The appliance should
not be used
near water
—
for example,
near a
bathtub, washbowl, kitchen sink, laundry tub, in a
wet basement, or near a swimming pool, etc.
LOCATION
— The appliance should be installed in a
stable location.
WALL OR CEILING
MOUNTING
— The appliance
should not be mounted to a wall or ceiling.
VENTILATION
— The appliance should be situated so
that its location or position does not interfere with
its proper ventilation. For example, the appliance
should not be situated on @ bed, sofa, rug, or
similar surface that may block the ventilation open-
ings; or, placed in a built-in installation, such as a
bookcase or cabinet that may impede the flow of
air through the ventilation openings.
HEAT — The appliance should be situated away from
heat sources
such
as radiators,
heat
registers,
stoves, or other appliances (including amplifiers)
that produce heat.
POWER
SOURCES
— The appliance should be con-
nected to a power supply only of the type describ-
ed in the operating instructions or as marked on the
appliance.
POWER-CORD
PROTECTION
— Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords
at plugs, convenience receptacles, and the point
where they exit from the appliance,
SAFETY
INSTRUCTIONS
[FOR KUT MODEL]
CLEANING
— The appliance should be cleaned only
with a polishing cloth or a soft dry cloth. Never
clean with furniture wax, benzine, insecticides or
other volatile liquids since they may corrode the
cabinet.
POWER
LINES
—
An outdoor antenna
should
be
located away from power lines.
NONUSE
PERIODS
~
The power cord of the ap-
pliance should be unplugged from the outlet when
left unused for a !ong period of time.
OBJECT
AND
LIQUID
ENTRY
—
Care should be
taken so that objects do not fall and liquids are not
Spilled into the enclosure through openings.
DAMAGE
REQUIRING
SERVICE
— The appliance
should be serviced by Pioneer authorized service
center or qualified service personnel when:
¢
The
power-supply
cord
or the plug has been
damaged; or
¢
Objects have fallen, or liquid has been spilled into
the appliance; or
The appliance has been exposed to rain; or
The appliance does not appear to operate normally
or exhibits a marked change in performance; or
¢
The appliance has been dropped; or the enclosure
damaged.
SERVICING
— The user should not attempt to service
the
appliance
beyond
that
described
in
the
operating instructions. For all other servicing, con-
tact the nearest Pioneer authorized service center.
OUTDOOR ANTENNA GROUNDING — !f an outside
antenna
is connected to the antenna terminal, be
sure the antenna system is grounded so as to pro-
vide some protection against voltage surges and
built up static charges.
In the U.S.A. section 810 of the National Electrical
Code, ANSI/NEPA No. 70-1981, provides informa-
tion with respect to proper groundig of the mast
and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of groun-
ding conductors,
location of antenna-discharge
unit, connection to grounding electrodes, and re-
quirements for the grounding electrode. See Fig.
A,
IMPORTANT
[FOR KUT MODEL]
The
lightning
flash
with
arrowhead,
within an equilateral triangle, is intended
to
alert the
user
of the presence
of
uninsulated
''dangerous voltage' within
the product's enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
EXAMPLE OF ANTENNA GROUNDING
AS
PER NATIONAL ELECTRICAL CODE INSTRUC-
TIONS
Ground clamp
a}, b)
Mast
ground
Ground
wire
Ground
clamps
Grounding electrode
driven 8' into the earth
(2.44 meters)
Fig. A
a)
Use No. 10 AWG (5.3 mm?) copper or No. 8 AWG
{8.4 mm?) aluminum or No. 17 AWG
(1.0 mm?)
copper-clad
steel or bronze
wire, or larger as
ground wires for both mast and lead-in.
b)
Secure
lead-in wire
from
antenna
to antenna
discharge unit and mast ground wire to house with
stand-off
insulators,
spaced
from
4 feet (1.22
meters) to 6 feet (1.83 meters) apart.
c)
Mount antenna discharge unit as closely as possi-
ble to where lead-in enters house.
exclamation
point
within
an
TO PREVENT THE RISK OF ELECTRIC
SHOCK,
DO
NOT
REMOVE
COVER
{OR BACK). NO USER-SERVICEABLE
PARTS
INSIDE.
REFER
SERVICING
TO
QUALIFIED
SERVICE
PERSON-
NEL.
equilateral triangle is intended to alert the
user
of
the
presence
of
important
operating and maintenance (servicing) in-
structions in the literature accompanying
the appliance.
IMPORTANT
To
prevent electric shock, do not remove
cover.
No user ser-
viceable parts inside, refer servicing to qualified service personnel.
Always disconnect all the equipment from the mains supply when
disconnecting the signal leads. The power cord should be con-
nected last, make sure that the power switch is off.
Unplug the set from the wall socket when it is not to be used for an
extended period of time.
[FOR USE IN UNITED KINGDOM
AND AUSTRALIA]
CAUTION 240 V:
Mains supply voltage is factory
adjusted at 240 V.
[FOR USE IN UNITED KINGDOM}
The wires in this mains lead are coloured in accordance with the
following cord:
Blue:
Neutral
Brown:
Live
:
As the colours of the wires in the mains iead of this apparatus may
not correspond
with the coloured
marking
identifying the ter-
minals in your plug proceed as follows:
The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the ter-
minal which is marked with the letter L or coloured red.
Equipment sold in the U.K. is not supplied with a power
plug.
Advertisement
