Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Cavli Wireless C Series
Summary of Contents for Cavli Wireless C Series
- Page 1 www.cavliwireless.com...
- Page 2 A WARRANTY OF ANY KIND, EXPRESS OR IMPLIED.THE INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE DUE TO PRODUCT VERSION UPDATEOR OTHER REASONS. FOR MOST RECENT DOCUMENTS, ALWAYS REFER THE PRODUCT PORTFOLIO SECTION AT WWW.CAVLIWIRELESS.COM. Copyright © Cavli Wireless Inc. All rights reserved...
- Page 3 .............................. 4 .............................. 7 1.1 Overview ..............................7 1.2 References ..............................7 2 Module Placement ............................8 2.1 mPCIe Connection ............................8 2.2 80-Pin Connection ............................9...
- Page 4 Figure 1 mPCIe - mPCIe direction of connection ..................8 Figure 2 Placing mPCIe into the mPCIe Slot of DDK ................9 Figure 3 80-Pin Connectors on the Module and DDK ................10 Figure 4 Placing the module onto the DDK ................... 10 Figure 5 Aligning the 80-Pin Connector and its slot ................
-
Page 5: Version History
VERSION HISTORY Version Edit Date Initial Version 25/08/2022... - Page 6 1.1 Overview This document aims to familiarize the reader on how to place a C-series Cavli Module onto the C-series Cavli DDK board. 1.2 References The present document is based on the following document: C-Series DDK Manual NOTE • Regardless of the DDK version, the method of placement of the module onto the board remains the same...
-
Page 7: Module Placement
Module Placement 2.1 mPCIe Connection Description: To access the basic functionality of the module though the DDK, the mPCIe must be connected to the mPCIe connector of the DDK. This gives the customer access to the AT port as well. Given below are the steps to the same: •... - Page 8 • Insert the mPCIe into the mPCIe connector slot Figure 2 Placing mPCIe into the mPCIe Slot of DDK • Make sure that the placement was proper and the connections are not loose • Once the checks are done, you are good to go 2.2 80-Pin Connection Description: To access the additional functionality of the module though the DDK, the 80-Pin Connector...
- Page 9 Figure 3 80-Pin Connectors on the Module and DDK Given below are the steps to the same: • Place the module’s mPICe onto the mPCIe connector Figure 4 Placing the module onto the DDK • Ensure that the 80-Pin connector faces the 80-Pin connector slot properly •...
- Page 10 Figure 5 Aligning the 80-Pin Connector and its slot Figure 6 Pressing the Connector onto the Slot...
- Page 11 Figure 7 Hard pressing the Connector onto Slot till click heard • If unsure, you can remove and reconnect the module again. Once done, all you need to do is to plug the DDK into your device (PC) and check the functionality of the module. An example on a properly connected module (C10GS) is given below NOTE •...
Need help?
Do you have a question about the C Series and is the answer not in the manual?
Questions and answers